Eaton

Eden Prairie, MN 55344

Company Details
14615 Lone Oak Road
Eden Prairie, MN 55344
US
http://www.eaton.com
Toll Free:(800) 386-1911

Eaton is a power management company with 2014 sales of $22.6 billion. Eaton provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton has approximately 102,000 employees and sells products to customers in more than 175 countries.

Articles & News
Eaton’s power distribution unit will be utilized in two electrified vehicle projects funded by grants from the Czech Republic.
Eaton Expands Mobility Capabilities in EMEA With Two Grants
The grants fund participation in two mobility projects, including the design and development of an electrified off-road truck and the development and demonstration of a power distribution unit and DC/DC converter for hydrogen fuel cell powered trucks.
March 21, 2024
Eaton invests more than $500 million in its North American manufacturing to meet rapidly increasing demand for the company’s electrical solutions across utility, commercial, data center, healthcare, industrial and residential markets.
Eaton Invests Over $500M to Support Electrification, Energy Transition & Digitalization in North American Manufacturing
The company is expanding manufacturing and bolstering resilience to increase the supply of its solutions for customers in utility, commercial, healthcare, industrial and residential markets across North America.
September 8, 2023
Pete Denk, president, Eaton’s Mobility Group
Eaton's New 'Mobility Group' Encompasses Former 'Vehicle Group' & 'eMobility' Businesses
The new name represents a focus on solutions across the propulsion spectrum and the evolving needs of its customers
August 17, 2023
RPS large LP12, LP16 and RD14 terminals are designed for vehicles typically used in construction and off-highway fields.
Eaton to Display Terminals and Connectors at CONEXPO
The HPLB power connectors are ideal for current and future electrified construction and off-highway vehicles.
March 9, 2023
New emissions regulations and increased electrification are bringing about the need for higher voltage system architectures.
Regulations and Technology Advancements Drive New Electronics System Architecture
A transition to 48V systems is taking place to better meet efficiency and emissions reduction targets as well as increased power demands in heavy-duty equipment.
January 25, 2022
Eaton is working to develop more cost-effective, easier to deploy charging infrastructure for commercial vehicle fleets.
Eaton Receives DOE Awards for EV Charging and Emissions Reduction Technology
The company plans to develop more cost-effective electric vehicle charging solutions for commercial vehicles and adapt its variable-valve actuation technology for agricultural equipment.
January 17, 2022
Products & Press Releases
Eaton has introduced the Bezares 500 series power takeoff unit that features quick, pneumatic shifting and has a low profile designed for a better fit.
Eaton Introduces 3 Power Take-Off Applications & Hydraulic Control Valves
The company's Mobility Group expands its mobile power products portfolio with the Bezares 3960, 2500 and 500 series power takeoff (PTO) units, as well as APSCO APV and APG series directional hydraulic control valves.
February 28, 2024
Eaton Aftertreatment
48-Volt Aftertreatment Heater Controller
The air-cooled electric catalyst heater controller is part of Eaton’s broader 48-volt electrical system portfolio.
June 30, 2022
Eaton ePowertrain
Eaton’s Vehicle Group Introduces New ePowertrain Business Unit
Power management company Eaton announced its Vehicle Group has formed a new ePowertrain business unit, which will focus on products from Eaton’s electrified vehicle (EV) transmission, reduction gearing and differential portfolios.
February 22, 2022
Eaton Ford PTO
Eaton to Showcase PTOs, Other Components at Work Truck Week
Eaton’s Vehicle Group’s Aftermarket division is displaying its lineup of Bezares Power Takeoffs (PTOs) and other related mobile power hydraulic components at the NTEA Work Truck Week March 9-11 at the Indiana Convention Center in Indianapolis.
February 22, 2022
Eaton Cylinder Deactivation and Exhaust Thermal Management Technologies Reduce Emissions
Recent testing with the Southwest Research Institute showed use of a CDA and close-coupled SCR catalyst reduced both nitrous oxide and carbon dioxide emissions.
November 17, 2021
Eaton Tvs Fuel Cell
Eaton Partners with DOE and Ballard to Improve Efficiency of Fuel Cells
Eaton is partnering with Ballard Fuel Cell Systems and the DOE’s National Renewable Energy Laboratory to develop fuel cell technology which improves fuel efficiency.
September 13, 2021
Videos & Resources
Facebooklogo
Electric Vehicle Charging Needs to Expand and Take Commercial Vehicle Requirements Into Account
Eaton says there is a need to rapidly deploy more charging infrastructure and develop customized solutions for commercial vehicles to aid market uptake.
September 28, 2021
Facebooklogo
Danfoss and Eaton Merger Aims to Advance Hydraulics Technology
Bringing together the hydraulics knowledge of these two companies will help with development of new products and technologies.
August 17, 2021
Mj7 Rzuoo 1920 5eb2cc431a2c4
Design & Engineering Insights: Eaton Dynamic Machine Control Aims to Improve Efficiency and Performance
Eaton's Dynamic Machine Control technology leverages software and machine data to make better decisions about what the machine needs at any given moment.
May 6, 2020
Maxresdefault 5ca4c9ff540fa
Technology News Tracker: Eaton Technologies for SuperTruck II
April 4, 2019
Eaton
Boom Stability Control: A Dynamic Machine Control Solution
The power of Eaton’s CMA valve and Pro-FX® Control application development tools combine to solve a complex machine problem quickly.
August 31, 2018
Maxresdefault 59035e64b2370
Dynamic Machine Control with Eaton's CMA
April 28, 2017
Request More Information
Fill out the form below to request more information about Eaton
More from Eaton
Eaton’s power distribution unit will be utilized in two electrified vehicle projects funded by grants from the Czech Republic.
Eaton Expands Mobility Capabilities in EMEA With Two Grants
The grants fund participation in two mobility projects, including the design and development of an electrified off-road truck and the development and demonstration of a power distribution unit and DC/DC converter for hydrogen fuel cell powered trucks.
March 21, 2024
Eaton has introduced the Bezares 500 series power takeoff unit that features quick, pneumatic shifting and has a low profile designed for a better fit.
Eaton Introduces 3 Power Take-Off Applications & Hydraulic Control Valves
The company's Mobility Group expands its mobile power products portfolio with the Bezares 3960, 2500 and 500 series power takeoff (PTO) units, as well as APSCO APV and APG series directional hydraulic control valves.
February 28, 2024
Eaton invests more than $500 million in its North American manufacturing to meet rapidly increasing demand for the company’s electrical solutions across utility, commercial, data center, healthcare, industrial and residential markets.
Eaton Invests Over $500M to Support Electrification, Energy Transition & Digitalization in North American Manufacturing
The company is expanding manufacturing and bolstering resilience to increase the supply of its solutions for customers in utility, commercial, healthcare, industrial and residential markets across North America.
September 8, 2023
Pete Denk, president, Eaton’s Mobility Group
Eaton's New 'Mobility Group' Encompasses Former 'Vehicle Group' & 'eMobility' Businesses
The new name represents a focus on solutions across the propulsion spectrum and the evolving needs of its customers
August 17, 2023
RPS large LP12, LP16 and RD14 terminals are designed for vehicles typically used in construction and off-highway fields.
Eaton to Display Terminals and Connectors at CONEXPO
The HPLB power connectors are ideal for current and future electrified construction and off-highway vehicles.
March 9, 2023
Eaton Aftertreatment
48-Volt Aftertreatment Heater Controller
The air-cooled electric catalyst heater controller is part of Eaton’s broader 48-volt electrical system portfolio.
June 30, 2022
Eaton ePowertrain
Eaton’s Vehicle Group Introduces New ePowertrain Business Unit
Power management company Eaton announced its Vehicle Group has formed a new ePowertrain business unit, which will focus on products from Eaton’s electrified vehicle (EV) transmission, reduction gearing and differential portfolios.
February 22, 2022
Eaton Ford PTO
Eaton to Showcase PTOs, Other Components at Work Truck Week
Eaton’s Vehicle Group’s Aftermarket division is displaying its lineup of Bezares Power Takeoffs (PTOs) and other related mobile power hydraulic components at the NTEA Work Truck Week March 9-11 at the Indiana Convention Center in Indianapolis.
February 22, 2022
New emissions regulations and increased electrification are bringing about the need for higher voltage system architectures.
Regulations and Technology Advancements Drive New Electronics System Architecture
A transition to 48V systems is taking place to better meet efficiency and emissions reduction targets as well as increased power demands in heavy-duty equipment.
January 25, 2022
Eaton is working to develop more cost-effective, easier to deploy charging infrastructure for commercial vehicle fleets.
Eaton Receives DOE Awards for EV Charging and Emissions Reduction Technology
The company plans to develop more cost-effective electric vehicle charging solutions for commercial vehicles and adapt its variable-valve actuation technology for agricultural equipment.
January 17, 2022
The Volvo FH Electric showed its ability to provide long range and reduced energy use in recent testing.
OEM Industry News Briefs: Testing of Volvo Electric Truck Shows Range and Efficiency Gains
Testing of a Volvo FH Electric showed extended range and reduced energy use, FPT wins award for biodiesel research, and more heavy equipment industry news you may have missed.
January 7, 2022
Eaton Cylinder Deactivation and Exhaust Thermal Management Technologies Reduce Emissions
Recent testing with the Southwest Research Institute showed use of a CDA and close-coupled SCR catalyst reduced both nitrous oxide and carbon dioxide emissions.
November 17, 2021
Top Products 2021
Top New Products of 2021
Winners of the 2021 Top New Products of the Year award offer a look at the top technologies engineering teams are looking for when designing new equipment.
October 30, 2021
Facebooklogo
Electric Vehicle Charging Needs to Expand and Take Commercial Vehicle Requirements Into Account
Eaton says there is a need to rapidly deploy more charging infrastructure and develop customized solutions for commercial vehicles to aid market uptake.
September 28, 2021
Eaton Tvs Fuel Cell
Eaton Partners with DOE and Ballard to Improve Efficiency of Fuel Cells
Eaton is partnering with Ballard Fuel Cell Systems and the DOE’s National Renewable Energy Laboratory to develop fuel cell technology which improves fuel efficiency.
September 13, 2021
Facebooklogo
Danfoss and Eaton Merger Aims to Advance Hydraulics Technology
Bringing together the hydraulics knowledge of these two companies will help with development of new products and technologies.
August 17, 2021
Eaton’s supercapacitors are able to quickly charge and discharge at higher rates than lithium-ion batteries.
Eaton Develops Suite of 48V Technologies to Help OEMs Meet Emissions Regulations
Motor generators, inverters, and supercapacitors are among the products under development as manufacturers shift to 48V systems to better meet emissions reduction targets.
August 11, 2021
Danfoss Headquarters A Building
Danfoss Formally Completes Acquisition of Eaton’s Hydraulics Business
Eaton’s hydraulics business will be combined with the Danfoss Power Solutions business segment, doubling the size of Danfoss’ hydraulics operations.
August 2, 2021
Eaton's Walterscheid WALFORMplus-SR system.
Eaton Walterscheid Tube-Fitting Technology Aids Fuel Economy for OEM Customer
Use of higher strength E355 grade tubing with thinner wall thickness helped the OEM achieve weight savings in its loader crane design.
July 20, 2021
The EAO Series 09 CANbus Keypad features ruggedized RGB halo illumination.
Weekly New Products Roundup: EAO Introduces the Series 09 CANbus Keypad/Rotary Controller Joystick Module
EAO’s Series 09 CANbus Keypad/Rotary Controller Joystick Module is an easy-to-integrate device allowing designers to specify only the HMI features needed for specific applications.
May 7, 2021
X3 Pump And Motor Family
Eaton X3 Medium-Duty Pump and Motor
The Eaton X3 medium-duty piston and motor is designed to help original equipment manufacturers improve machine control, productivity, and system life.
April 23, 2021
Large excavators are more likely to take a hybrid approach to electrification due to high power demands.
Considerations for Hydraulics in Electric Off-Highway Equipment
Deployment of efficient hydraulic components and architectures can provide power saving opportunities in electric powered heavy equipment.
April 5, 2021
Cls Lsrv Image Hr
Eaton CLS Sectional Load Sense Relief Valve
The CLS sectional load sense relief valve is ideal for machinery with swing and clamp functions, including forestry equipment, excavators and backhoes.
March 5, 2021
Eaton Hydraulics Steel Adapters
Eaton Steel Adapters
Eaton's steel adapters feature Dura-Kote plating which offers up to 10 times better corrosion protection than SAE standards.
February 24, 2021