Formulated for electrical potting and encapsulation applications, Master Bond EP36AO combines high thermal conductivity with thermal stability. This flexible, heat-resistant epoxy has superior mechanical properties.
- Serviceable over wide temperature range of -80 F to 500 F
- Provides high performance in harsh conditions
- Features solid electrical characteristics once cured
- Offers volume resistivity of 2 to 3 x 1012 ohm-cm and thermal conductivity of 9 to 10 BTU·in/ft2·hr·F at 25 C, and dielectric strength of 400 volts/mil
- Coefficient of thermal expansion exceeds 75 in/in x 10-6/C at 60 C
- Tensile strength is over 2,000 psi
- Adheres well to both metallic and non-metallic substrates
- Features long-term chemical resistance to an array of organic and inorganic chemicals
- One component system that does not require mixing
- Offers convenience of flexible cure schedules
- Typical gel time is 30 minutes at 180 F, with full cures attained in 2 to 2 1/2 hours at 300 F, which can be shortened further at higher temperatures
- Retains liquidity as long as temperature does not exceeed 180 F
- Has minimum shelf life of three months but can last as long as six months in its original unopened container
- Available in pints, quarts, gallons and five gallon containers, and is now also available in 30 gram cookies
Request More Information
Fill out the form below to request more information about EP36AO Epoxy
