Cummins X15 Heavy-Duty Engines

The Cummins X15 Performance and X15 Efficiency Series engines provide lower fuel consumption come factor-ready for Over-the-Air engine programming.

July 25, 2016

X15 Performance Series

X15 Performance Series

Cumminslo 10108212

Cummins Inc. has revealed the next-generation 15-L X15 heavy-duty engine.

Rated at 400-605 hp (298.28-451.15 kW)
Ready to exceed EPA 2017 greenhouse gas (GHG) and fuel-efficiency standards
Provides lower fuel consumption, extended service intervals and enhanced performance
Incorporates ADEPT, SmartCoast and Predictive Cruise Control (PCC) functions to gain a further 3% fuel economy improvement
Features 400 hp (298.28 kW) braking power at 1,300 rpm
Includes optimized compression ratio, air handling system and cam profile to increase both fuel efficiency and performance capability
Optimized cam profile minimizes inherent parasitic loss during combustion, increasing thermal efficiency and providing high compression ratio
Cummins VGT Turbo and XPI fuel system improve engine response and reduce fuel consumption
Minimized friction losses throughout, including water pump, gear train, lube system, piston and EGR provide additional efficiencies
Factory-ready to enable Over-the-Air (OTA) engine programming and customization when connected to a telematics system
Two configurations available, the X15 Performance Series and X15 Efficiency Series

X15 Performance Series

Rated at 485-605 hp (361.66-451.15 kW)
For heavy-haul, vocational and emergency vehicles
Upgraded high flow air-handling system gives faster pedal response for enhanced driveability at full payload and steep-gradient climbing
Peak torque of 2,050 lbs.-ft. (2779.43 Nm) is delivered across a very wide engine rpm range, so less shifting is needed and less fuel is used
Provides over 450 hp (335.57 kW) engine braking at just 1,500 rpm and up to 600 hp (447.42 kW) at 2,100 rpm

X15 Efficiency Series

For line-haul and regional-haul applications
Offers high level of fuel efficiency and payload productivity
Power rating range of 400-500 hp (298.28-372.85 kW) and up to 1,850 lbs.-ft. (2508.26 Nm) of peak torque available at 1,000 rpm
Delivers class-leading fuel economy when integrated with Cummins and Eaton SmartAdvantage Powertrain by precisely adjusting to grade, vehicle weight and driver input via throttle position

Fill out the form below to request more information about Cummins X15 Heavy-Duty Engines

19188 006

Scania DC13 166 13-L Engine

The DC13 166 offers fuel savings of up to 2% and is suited for weight-sensitive applications where solid power is crucial.

Cm20181122 17122 03622

New Cat C13B Engine Delivers More Power in Compact, Lightweight Design

The engine features a non-EGR aftertreatment system to meet EU Stage V and U.S. EPA Tier 4 Final emission standards.

Cursor 9 natural gas engine

FPT Unveils Cursor 13 NG EVO Prototype Natural Gas Engine

The engine has a specific cylinder head featuring a pent-roof combustion chamber with tumble intake ports, designed for optimal positive-ignition combustion.

Cummins 8 9 Litre L Series Engine

Cummins 8.9-Liter L Series China Stage IV Engine

Debuted at bauma China 2018, the Cummins 8.9-L engine provides up to 400 hp and is dual certified to both EU Stage V and China Stage IV emissions requirements.

Cummins 8 9 Litre L Series Engine

Cummins Debuts China Stage IV Products at bauma China

The new high performance 8.9-L L Series engine moves up to 400 hp (298 kW) with a peak torque of 1,800 Nm, an 11% increase over that of the prior CS III engine.

18 C0146 001

Daimler Extends Engine Portfolio

Daimler's Detroit Diesel Corp. has released a new 7.7 L DD8 engine for medium-duty applications.

The AC 45 City crane.

Rolls-Royce Supplying MTU Engines for New Terex Cranes

Rolls-Royce will provide its Series 6R 1500/OM 473 engine and 6R 1000/OM 936 engine for use in Terex Cranes' two new Demag models.

Stage V D8 engine and EATS

Volvo Penta Introducing Full Lineup of EU Stage V Engines Intermat 2018

Volvo Penta will exhibit its full range of Stage V engines offering a power range from 105-565 kW.

Liebherr and KAMAZ complete the development of a new engine series (from left to right: Willi Liebherr and Sergey Kogogin).

Liebherr and KAMAZ Start Production of New Diesel Engines

Liebherr and KAMAZ have mutually developed a range of 6-cylinder in-line engines which meet the current Euro V emissions requirements, as well as the future Euro VI standards.

Cm20181122 17122 41673

Cat C13B Engine

Caterpillar's Cat C13B engine is 32% lighter than previous models while providing a power output of 340-430 kW.

Cat C9 3 B Engine

Caterpillar Expands Stage V, Tier 4 Final Industrial Engine Range with New 9.3 L Offering

Caterpillar's new Cat C9.3B engine is 140 kg lighter than its predecessor and has a 39% smaller aftertreatment package size.

Man D1556 Standard 1d 5a0a1ebeae2e5

MAN D1556 Engine

During Agritechnica, MAN introduced its 9.0 L D1556 engine with a modular aftertreatment system that can be modified to comply with various emissions regulations.

Man D1556 Standard 1d

MAN Engines Introduces New 9.0 L Off-Road D1556 Engine

At Agritechnica 2017, MAN introduced its D1556 which generates 205-324 kW of power.

The D5 engine for EU Stage V (which is matched to the EATS).

Volvo Penta Reveals New 5- and 13-L Stage V Engines

Volvo Penta's new 13-L Stage V engine offers a maximum output of 405 kW while the 5-L provides up to 160 kW.

Scania Engine

Scania’s Latest Gas Engine Designed for Long-Distance Transport

Scania's new OC13 gas engine has a range of 500-1,100 km depending on whether operated on CNG or LNG.

Scania410hp Engine

Scania Introduces Euro 6 Gas Engine

Scania's new gas engine provides a power output of 410 hp and can be used both for long-distance transport and construction-site movements.

Fpt Cursor13 Ng 3

Producing Benefits for the Environment Today, Not Tomorrow

An engine manufacturer introduces a new natural gas engine offering diesel-like performance.

FPT Unveils New Cursor 13 Natural Gas Engine

FPT's new Cursor 13 NG engine delivers up to 460 hp and is capable of running on CNG, LNG, methane and biomethane.

Volvo D13 Turbo Compound Engine Powers New Volvo Vnl Series To 7 5 Percent Improvement In Fuel Efficiency 596d29b49ed3f

Volvo D13 Turbo Compound Engine in New VNL Series Provides 7.5% Fuel Efficiency Improvement

The Volvo D13TC utilizes turbo compounding technology that recovers energy typically wasted through the exhaust, converting it into usable mechanical energy that is transferred back to the engine.

The A26 engine is now available in LT Series truck models.

International Truck Ships First On-Highway Vehicles with A26 Engine

International Truck has begun shipments of its LT and RH Series trucks with the company's 12.4-L engine designed to provide a 9% fuel economy improvement.

Volvo Penta 1 D11 Stage V Complete Solution 595256838e6e2

Volvo Penta Extends Power Output of D11 Stage V Engine

Volvo Penta's Stage V D11 engine has now been verified for a power output of 235-315 kW.

Scania 593e76266a04b

Scania Engines Achieve New Standards in Fuel Efficiency with Latest Euro 6 V8s

Scania's new Euro 6 V8 engines reduce fuel consumption 7-10% in vehicles with higher combined truck and trailer weights or which are traveling at higher speeds.

Perkins 1706 J E93 Ta 58dbc9b20dd5d

Perkins 1700 Series Engine

Debuted at CONEXPO 2017, Perkins' 1700 Series engines offer a power range of 335-456 hp and have an on-engine aftertreatment system designed to reduce installation costs.

Mrg 3512 E Tier 4 Final Well Stimulation 583c569282d4d

Caterpillar 3500E Series Engine

The Caterpillar 3500 E Series engine features a new block and crankshaft design for increased durability and can be remanufactured to help customers extend the life of their investment.