Davy Maes

DAVY MAES is senior project leader and team lead SmartX at Flanders Make.

From the Author
Transmissions
A new safety analysis methodology
Flanders Make
After close analysis of problems arising within SIL quantifiers, a new component-based methodology emerged.
The use case is a control system of a transmission. The inputs to this control system are (i) a switch to set the gear in forward, neutral or reverse, and (ii) a switch for up and down switching. Two safety functions are defined. In the safety analysis of these safety functions, Dana needs to perform SIL quantification on the control hardware. A simplified system concept for the controller is seen above.
Page 1 of 1