Market Analysis
Spec Guides
Trends
Media
Events
Advertise
Magazine
Directory
Magazine
Newsletter
Search
Engines
Drivetrains
Fluid Power
Electronics
Operator Cab
Engineering & Manufacturing
Engineering & Manufacturing
Power Systems
Daimler Preparing for Production of Fuel Cells
Experts at the Stuttgart site are developing new, state-of-the-art production facilities as the technological template for subsequent series production.
Extension Approved for Stage V Transition Deadlines
Navistar Breaks Ground on San Antonio Manufacturing Facility
Manufacturers Must Rethink Global Operations due to Impacts of COVID-19 Says New Study
Equipment Manufacturers Continue to Face Significant Challenges due to COVID
Engineering Futurists See Greater Adoption of Technology, Need for More Talent
Recommended
Engineering & Manufacturing
Red Dot Announces Winners of 2020 Product Design Awards
Innovations in construction, agricultural and other off-road equipment have been honored once again with the Red Dot Design award.
Market Analysis
COVID-19 and the Heavy Equipment Industry
The global outbreak of coronavirus has brought about many changes for heavy equipment OEMs and the industry as a whole.
Sponsored
Learn how FEMA Corporation’s suspended armature technology can work for you
Download this white paper to learn the basis and evolution of FEMA Corporation’s force motor electro-hydraulic suspension technology and how it is applied to products and applications today.
Latest
Red Dot Announces Winners of 2020 Product Design Awards
Innovations in construction, agricultural and other off-road equipment have been honored once again with the Red Dot Design award.
Design & Engineering Insights: NI Electric Vehicle Hardware-in-the-Loop Test Architecture
The HIL technology makes it easy for design teams to scale the testing and validation to specific components or entire electric vehicle powertrain systems.
Ricardo Software 2020.2 Includes Battery Modeling Capabilities
The new 2020.2 release of Ricardo's powertrain design and optimization software includes several new features including those to aid with electric vehicle battery design.
AEM Launches 'Equipped to Vote' Campaign
The new nationwide digital campaign is designed to educate, engage, and mobilize voters in the equipment manufacturing industry.
Reshoring of Manufacturing in the U.S. Poses Benefits and Challenges
Supply chain strains experienced during the COVID-19 pandemic has brought to light the potential for bringing more manufacturing back to the U.S., and how that could impact the economy and construction industry.
PMA June 2020 Business Conditions Report Shows Optimism for Improved Conditions
The Precision Metalforming Association's latest report shows members expect an improvement in business conditions with 57% anticipating an increase in orders.
Learn how FEMA Corporation’s suspended armature technology can work for you
Download this white paper to learn the basis and evolution of FEMA Corporation’s force motor electro-hydraulic suspension technology and how it is applied to products and applications today.
COVID-19 to Accelerate Digitalization in Manufacturing
The COVID-19 pandemic has brought to light the need to further digitalize manufacturing facilities and remove silos, says Kari Terho of Elisa Corp.
National Instruments Introduces New Brand Identity
Now known as NI, the company is reaffirming its commitment to providing engineering solutions and to those who utilize them.
IMTS Cancelled, Virtual Events Planned in its Place
The International Manufacturing Technology Show has cancelled its 2020 show due to ongoing concerns regarding COVID, but will offer digital events in the coming months.
Design & Engineering Insights: Grid Raster Sees Growth in Use of AR/VR to Reduce Development Time
Grid Raster has seen use of augmented and virtual reality increase in the past 18 months as the technology has improved and use cases have evolved.
Ricardo Partners with Excel Engineering on Test and Prototyping Services
The partnership with Excel Engineering will accelerate Ricardo's direct North American research and development activities throughout the transportation sector.
DTNA Resumes Manufacturing Operations, Sees Increase in Freight Activity
Daimler Trucks has observed weekly mileage of its telematics-connected trucks increasing and projects a return to pre-crisis levels by the end of June.
AEM Calls for Bipartisan Effort in Passing Surface Transportation Bill
AEM President Dennis Slater says investing in our nation’s infrastructure benefits all Americans and the government should prioritize providing long-term funding for critical infrastructure modernization.
Grede Acquires Assets of RMG Waukesha
The acquisition expands strategic growth for Grede in the commercial vehicle and industrial markets.
Design & Engineering Insights: dSPACE Simulation Tools Aid Autonomous Vehicle Development
Simulation tools enable engineers to quickly evaluate various scenarios to ensure the safety of autonomous vehicles and equipment.
Manufacturers Share Best Practices for COVID Management
AEM has compiled a list of best practices based on discussions with member for getting manufacturing operations up and running again while protecting employees from further spread of coronavirus.
Spartan Motors Changes Corporate Name to The Shyft Group
The company says its new name reflects the next phase of its business transformation; its brands will continue operating under their current names.
Learn how FEMA Corporation’s suspended armature technology can work for you
Download this white paper to learn the basis and evolution of FEMA Corporation’s force motor electro-hydraulic suspension technology and how it is applied to products and applications today.
Delphin Technology Expert Vibro Data Acquisition and Control System
The Delphin vibration measurement system, available from CAS DataLoggers, enables users to capture and analyze data on how their products react to vibrations.
Manufacturers Continue Efforts to Provide Needed Supplies to Combat COVID
The number of manufacturers offering their help to provide PPE and other medical supplies to those combatting COVID-19 continues to increase.
Heavy Truck and Equipment Manufacturers Implement New COVID Safety Protocols
As manufacturers begin reopening and ramping up production, they are putting in place new procedures to keep employees safe from coronavirus.
New igus Material Enables 3D Printing of Electrostatically Conductive Components
The new iglidur I8-ESD enables to 3D print components with electrostatically conductive properties.
Manufacturers to Spend $19.8 Billion on Data Management and Analytics by 2026
ABI Research says investment in data collection processes and sophisticated analytical tools will provide manufacturers with critical insights into machinery health and production line optimization.
PHIL Offering SSAB Hardox HiTemp Steels for Hot Slag Applications
SSAB Hardox HiTemp steel is capable of transporting materials in excess of 1,200 F and will be used in PHIL's customized Hot Slag Bodies.
Robots and Automation to Aid Job Growth in Post COVID-19 Economy
The International Federation of Robotics reports increased use of robots in the manufacturing sector will help automate tasks, augment jobs and create new career opportunities.
Strength of Industries: Manufacturers Get Back to Work and a New Normal
For the many heavy equipment and component manufacturers who had to temporarily shut down due to COVID-19, operations are starting to reopen and get back to some normalcy.
Latest dSPACE TargetLink Update Supports Adaptive AUTOSAR
Designers can now use existing non- or Classic AUTOSAR models for Adaptive AUTOSAR with TargetLink 5.0 and later.
TargetLink 5.0 ECU Autocoding Software
dSPACE has released the latest version of its production code generator, TargetLink, which supports Adaptive AUTOSAR.
AEM Urging Manufacturers Sign Petition for Government to Support U.S. Manufacturing
AEM and I Make America is calling on the equipment manufacturing industry to join together in calling on Congress and the Trump administration to better support U.S. manufacturing.
.jpg?crop=focalpoint&fit=crop&fp-x=0.5&fp-y=0.5&h=191&w=340)
.jpg?crop=focalpoint&fit=crop&fp-x=0.5&fp-y=0.5&h=135&w=240)
