MW 50

July 10, 2007
Poclain Hydraulics Inc.
Mw50 10057118
Jpeg Logo Poclain Hydraulics

Poclain Hydraulics offers the MW 50, a motor offering both high displacement and high displacement ratio.

  • Features three different displacements, thus three different operating modes
  • 190 hp
  • Measures 15 in. dia. by 24 in. long
  • Weighs 925 lbs.
  • Increased efficiency and reduced pollution, great for Tier 3 engines
Request More Information
Fill out the form below to request more information about MW 50
Latest
Photo Pi 006 19 Bauma Mcr S 1
Bosch Rexroth MCR-S Radial Piston Motor
The Bosch Rexroth MCR-S offers high efficiency and durability even in high temperature applications.
February 22, 2019
CMF motor (left) and CMV motor (right)
Linde CMV and CMF Bent Axis Motors
Linde's CMV and CMF bent axis motors feature a high power density and speed capability of up to 7,200 rpm.
September 21, 2018
In the case of seed drills, reducing noise emission and optimizing the working efficiency are the focus of recent developments. With quiet running, high speeds and a high load rating for external forces, the internal gear motors from Bucher Hydraulics' QXM-Mobil Series meet the exacting requirements for drives for fans, blowers and compressors.
Bucher Hydraulics QXM Internal Gear Motors aid Performance in Seed Drills
Combining high speeds with quiet operation, QXM internal gear motors from Bucher Hydraulics deliver impressive performance in seed drills.
December 13, 2017
Xlh Angle1 Solid High Res
Eaton Xcel Series Low-Speed, High-Torque Spool and Disc Valve Motors
The Eaton Xcel Series low-speed, high-torque spool and disc valve motors feature a three-zone design allowing true bi-directional operation.
November 9, 2017
Mh Series 58ebac3d55253
Muncie MH Series Low Speed High Torque Motors
Muncie Power Products' MH Series motors feature a roller gerotor design which reduces sliding friction between the rotor and stator for smooth, efficient performance.
April 10, 2017
Motors Cover
Motor Spec Guide
The 2018 Motor Spec Guide features hundreds of heavy-duty hydraulic motors for the on- and off-highway vehicle markets. Find the exact motor that meets your specific application needs.
March 13, 2017
Orbital X 24874 58b9cfe7103d9
Danfoss Orbital X Motors
The Danfoss Orbital X motors, introduced at IFPE 2017, improve bearing capacity by 20% and shaft seal life by 50%.
March 6, 2017
HP 50 2 speed with scallops 57f8013d7dc23
Eaton HP50 Track Motor
The Eaton HP50 track motor enables higher speeds, offering up to 23% higher starting torque.
October 10, 2016
Bosch Rexroth Displaying Drive and Control Solutions, Virtual Reality Remote Maintenance at MINExpo
Bosch Rexroth will display products such as the Hagglunds CBM offering 50% more torque, its modular GFT 8000 Series, as well as demonstrate virtual reality remote maintenance support capabilities.
September 23, 2016
Eaton 2KGerolerMotor 575713075fe5f
Eaton Introduces "Drive in a Drive" Technology for 2000 Series Motors
Eaton's "drive in a drive" technology helps save space and provides more displacement options to help OEMs meet their application needs.
June 7, 2016
photo PI 002 16 MCR T 572915ccd6cd2
Bosch Rexroth MCR-T Radial Piston Motor
Bosch Rexroth's MCR-T radial piston motor features a 10% higher starting torque to provide more more tractive force.
May 4, 2016
WhiteDriveProducts RE505Motor 569ff04dc93df
White Drive Products 505 (RE)Series Motor
White Drive Products' 505 (RE)Series motor offers greater shaft seal life in high side load applications.
January 20, 2016
Kraft Fluid Systems has been a Danfoss PVG Build Center Since 1992
Sponsored
Kraft Fluid Systems has been a Danfoss PVG Build Center Since 1992
Danfoss PVG proportional valves are designed for demanding equipment tasks. KFS has been an authorized build, sales, and service center for 30 years.
July 1, 2021
Foto PI 038 15 A10VER 5660901161283
Rexroth A10VER Axial Piston Variable Motor
The Rexroth A10VER axial piston variable motor includes a reversing operation to clean dust and debris from engine cooling systems.
December 7, 2015
Linde Hydraulics wins Agritechnica Innovation Award
Linde Hydraulics' HMV105D drive motor has been awarded the Agritechnica Silver Innovation Medal.
November 9, 2015
Rexroth A2FMBentAxisHydraulicMotor 563b8b9fc8c6b
Rexroth A2FM 70 Series Bent-Axis Hydraulic Motors
The Rexroth A2FM 70 Series bent-axis hydraulic motors are up to 26% shorter than previous versions for use in smaller installation spaces.
November 5, 2015
Comer Industries system for selfpropelled feed mixers 563b5d18b0c31
Comer exhibiting forage processing technologies at Agritechnica 2015
Comer's S-238 differential axle and PGA-2503 VM auger drive with hydraulic control are among the technologies it will display for the agricultural sector.
November 5, 2015
Poclain MS05/MSE05 High Flow Motor
Poclain Hydraulics' MS05/MSE05 motors feature new valving to reduce pressure drops up to 50%.
November 3, 2015
Poclain MHP20 and MHP27 Hydraulic Motors
Poclain Hydraulics' MHP20 and MHP27 hydraulic motors, being introduced at Agritechnica 2015, feature are designed to achieve high speeds and power levels.
November 2, 2015
The “plug-and-perform” telematics platform offers capabilities including data analysis, remote diagnostics, remote change of system parameters, machine location and tracking, and machine efficiency monitoring and analysis.
Danfoss exhibiting most recent product launches at Agritechnica 2015
Danfoss will display several of its most recently launched products, including its reverse displacement motor, at Agritechnica.
October 26, 2015
Muncie Power Low Speed High Torque Motors
Munci Power Products' low speed high torque motors are capable of achieving high efficiencies across a broad torque range.
October 19, 2015
Duraforce HMV Catalog 5604170734695
Eaton's DuraForce pumps aid maneuverability of Kalmar Rough-Terrain Forklifts
Eaton's HPV pumps and HMV motors used in Kalmer RT022 Rough-Terrain Telescopic Forklifts use automotive drive control for predictable and reproducible ground speed capabilities.
September 15, 2015
Caterpillar Inc.’s 313F L GC hydraulic excavator uses a 70 hp (52 kW) Tier 4 Final engine to provide power to the machine’s hydraulic system (read more, 12058192). The hydraulic system’s load-sense pump and main control valve calculate the machine’s exact work demands to deliver the right amount of power for digging, lifting and attachment use on the job.
Hydraulics in the limelight
After years of engines being the star system for vehicle performance, hydraulics is getting its time to shine.
September 4, 2015
Danfoss Reverse Displacement Motors
Danfoss Reverse Displacement Motors
May 20, 2015