Phillips Industries

12012 Burke St.
Santa Fe Springs, CA 90670
http://www.phillipsind.com
Phone:(562) 781-2121
Fax:(562) 781-1177
Request More Information
Fill out the form below to request more information about Phillips Industries
Related
The MULTIGIG RT 2-R connector improved upon traditional connector technology by featuring four points of contact which improves durability in rugged applications as well as reliability for the board-to-board interface.
Durable contacts make for long-lasting connections
April 23, 2013
More from Phillips Industries
Commercial Vehicle Industry Shows Support to Veterans
Phillips Industries, Meritor, SAF-Holland and Minimizer have teamed up to support the Wyakin Foundation to create awareness about veteran transition and education.
January 18, 2018
PhillipsIndustries SAEJ3082OffsetSocket 56cf736a302a2
Phillips Industries Auxiliary Vertical Dual Pole Plug and Socket
The SAE J3082 compliant auxiliary vertical dual pole plug and socket from Phillips Industries provides power connections between a tractor and equipment installed on the trailer.
February 25, 2016
Round flange version
Phillips Industries 4.0-Inch PERMALITE XT Stop-Tail-Turn Light
The Phillips Industries 4.0-inch PERMALITE XT Stop-Tail-Turn Lights include nine diodes for brighter illumination.
October 12, 2015
Air Defense schematic 55899b570a766
Phillips Industries AIR-DEFENSE System Brake In-Line Filtration with Quick-Change Cartridge
Phillips Industries' AIR-DEFENSE brake in-line filtration system includes a Quick-Change Cartridge which traps debris before it reaches trailer brake lines and causes damage.
June 23, 2015
Phillips Industries supports Wyakin Warrior Foundation
Phillips Industries has raised and contributed over $30,000 for the Wyakin Warrior Foundation which provides mentoring, financial support and professional development for post-9/11 veterans.
June 15, 2015
PhillipsLite Sentry 551022f32220e
Phillips Industries LITE-SENTRY
Phillips Industries introduces LITE-SENTRY which monitors exterior trailer lighting and instantly alerts drivers when a light or connection fails.
March 23, 2015
Phillips Industries celebrates opening of new Electrical Harness Division facility
Phillips Industries recently celebrated the opening of its newly expanded Electrical Harness Division facility located in Mexico.
March 12, 2015
Phillips Industries opens new facility in Mexico for Electrical Harness Division
Phillips Industries has opened a new facility in Mexico for its Electrical Harness Division to better meet the increasing demand for its products in that region.
December 9, 2014
Phillips Industries Permalite Xt Marker Light 547dc18398019
PERMALITE XT PC2 Rated Round Marker/Clearance LED Lights
The PERMALITE XT PC2 Rated Round Marker/Clearance LED Lights from Phillips Industries are durably designed and feature corrosion resistance to survive in harsh operating environments.
December 2, 2014
Phillips Moq2013 546f653e6438d
Phillips Industries' Electrical Harness Division receives DTNA Masters of Quality Award
Phillips Industries' Electrical Harness Division was recently presented with the DTNA Masters of Quality Award.
November 21, 2014
Phillips Industries Redand Blue Airlines
Phillips Industries expands rubber air hose line
Phillips Industries has expanded its rubber air hose line by adding pre-fabricated and bulk air hoses in blue and red to note emergency and service lines.
July 9, 2014
Vice President of Engineering at Phillips Industries retires
John Jacobs, the Vice President of Engineering at Phillips Industries, is retiring after 32 years with the company.
July 1, 2014
Phillips Industries forms partnership to increase availability of harness and trailer lighting
Phillips Industries' new partnership with Innotec Group will provide LED lighting and harness packages for the commercial vehicle industry.
June 30, 2014
Hddc2014
Phillips Industries and customers raise money for SickKids Foundation
Phillips Industries recently presented a check for over $18,000 to the SickKids Foundation from money raised by the company and its customers.
June 17, 2014
Phillips Industries hires new Director of Engineering
Phillips Industries announces it has hired Dave Lajeunesse as its new Director of Engineering.
May 12, 2014
Phillips Industries forms partnership to supply harness and trailer lighting technology
Phillips Industries announces a new partnership with Innotec in which Innotec's BOARDFREE LED lights will be packaged with Phillips' STA-DRY trailer harnesses.
March 10, 2014
The MULTIGIG RT 2-R connector improved upon traditional connector technology by featuring four points of contact which improves durability in rugged applications as well as reliability for the board-to-board interface.
Durable contacts make for long-lasting connections
Electronic connector manufacturers focus on creating more durable connectors to ensure these products are able to perform properly and survive in heavy-duty applications.
April 23, 2013
Phillips Industries Displays its Latest Corrosion-Resistant Connector at TMC Annual Meeting
At the annual meeting of the Technology and Maintenance Council Phillips Industries exhibited its latest connector product, the STA-DRY QCMS2 which prevents the buildup of corrosion.
March 11, 2013
Phillips V Check Ii
Phillips Industries Introduces V-CHECK II Battery Status Indicator
Phillips Industries has released the latest version of its battery status indicator, the V-CHECK III, which digitally monitors battery power.
January 9, 2013
Phillips Industries Displaying Products for the Global Marketplace at IAA Commercial Vehicle Show
Phillips Industries will be displaying several products for the global marketplace during the IAA Commercial Vehicle show in Hanover.
September 19, 2012
Phillips Industries' Facility in Mexico Receives Masters of Quality Award from Daimler Trucks
Phillips Industries' facility in Mexico has received the Masters of Quality Award from Daimler Trucks for its success as a supplier and continuous improvement efforts.
September 6, 2012
Phillips Industries Weather Tite Permaplug
Phillips Industries Redesigns PERMAPLUG Connectors
Phillips Industries has made a redesign to its PERMAPLUG connectors which now feature a thick rubberized sealing component.
August 16, 2012
Phillipsqcms2 10704992
STA-DRY QCMS2 Plug/Socket
Phillips Industries' STA-DRY QCMS2 plug/socket provides corrosion resistance by keeping contaminants from entering electrical systems.
April 24, 2012
Phillips Industries Hires New Mid Atlantic Territory Sales Manager
Phillips Industries announces it has hired Perry Criscuolo as the company's new Mid Atlantic Territory Sales Manager.
April 4, 2012