Design Concept: Sun Force

March 10, 2015

3 54c952b8d1a15

Sun Force is a fleet of modular construction machines powered primarily by the sun.

Designers:

The Thomson H-Track electro-hydraulic linear actuator handles force up to 4,800 lb. and features the smallest mounting envelope in its class.

Electro-Hydraulic Actuators Offer Ability to Handle Heavy Loads in Tight Spaces

Compared to hydraulic cylinders, electro-hydraulic actuators can offer many benefits including increased load handling and a more compact installation space.

Although construction work continues in some parts of the world, equipment sales will likely be negatively impacted in the near term due to coronavirus.

COVID-19 and the Heavy Equipment Industry

The global outbreak of coronavirus has brought about many changes for heavy equipment OEMs and the industry as a whole.

The Dana Spicer e-Axle concept replaces a traditional off-highway driveline with one featuring two independent axles powered by parallel-mounted electric motors.

Drivetrain Components will Evolve due to Vehicle Electrification

Drivetrain systems and components are anticipated to see many changes regarding size, packaging and gearing as electrification continues to increase.

Manufacturing Operations P Az Sr Qf3 Xuq Us

AEM Applauds Legislation to Strengthen Manufacturing in America

“The Association of Equipment Manufacturers commends the introduction of the National Institute of Manufacturing Act to strengthen the manufacturing sector," says AEM President Dennis Slater.

Covid 19 Decals

Superior Signals Social Distancing Decals

SSI's line of social distancing decals are durably designed and made to be highly visible.

Danfoss Editron Lappeenranta Production Facility

Danfoss Editron Sets Manufacturing Record at Finnish Production Facility

Danfoss Editron has increased its record manufacturing rate of power electronic products by 13% compared to its previous monthly high.

Dashboard Hi Res

Sun Hydraulics CANpoint XMD Configuration Software

The CANpoint software allows XMD mobile drivers to be configured quickly and easily over CANbus using a computer.

20 C0294 002

Daimler Preparing for Production of Fuel Cells

Experts at the Stuttgart site are developing new, state-of-the-art production facilities as the technological template for subsequent series production.

Componentson Engine 1066267 Us

Extension Approved for Stage V Transition Deadlines

CECE reports Member State Ambassadors to the European Commission have approved an extension for the EU Stage V transition deadlines.

A rendering of the new Navistar manufacturing facility in San Antonio.

Navistar Breaks Ground on San Antonio Manufacturing Facility

The new 900,000-sq.-ft. plant will have the capacity to produce Class 6-8 vehicles and is anticipated to begin vehicle production in 2022.

In light of the COVID-19 pandemic, manufacturers may need to rethink their global supply chains.

Manufacturers Must Rethink Global Operations due to Impacts of COVID-19 Says New Study

Supply chain disruptions experienced during COVID-19 show the need for manufacturers to redesign their global production networks.

Construction Equipment Dor Qs Imuo Pu Us

Equipment Manufacturers Continue to Face Significant Challenges due to COVID

Three quarters of equipment manufacturer executives said in a new AEM survey the impact of the COVID-19 pandemic on the overall economy is still very negative.

More engineering talent will be needed in the future to help keep innovation moving forward.

Engineering Futurists See Greater Adoption of Technology, Need for More Talent

“The Impact of Technology on Engineering” brought to light the need for more engineering talent, as well as technology and infrastructure investments.

John Deere 8RT Tractors are available with an AirCushion suspension system to aid with operator comfort.

Red Dot Announces Winners of 2020 Product Design Awards

Innovations in construction, agricultural and other off-road equipment have been honored once again with the Red Dot Design award.

Ni Screenshot

Design & Engineering Insights: NI Electric Vehicle Hardware-in-the-Loop Test Architecture

The HIL technology makes it easy for design teams to scale the testing and validation to specific components or entire electric vehicle powertrain systems.

Battery Pack Cht

Ricardo Software 2020.2 Includes Battery Modeling Capabilities

The new 2020.2 release of Ricardo's powertrain design and optimization software includes several new features including those to aid with electric vehicle battery design.

Tractorsin Factory T Anz Pb V Xj Qo Us

AEM Launches 'Equipped to Vote' Campaign

The new nationwide digital campaign is designed to educate, engage, and mobilize voters in the equipment manufacturing industry.

Tc Episode

Reshoring of Manufacturing in the U.S. Poses Benefits and Challenges

Supply chain strains experienced during the COVID-19 pandemic has brought to light the potential for bringing more manufacturing back to the U.S., and how that could impact the economy and construction industry.

PMA says metalforming companies are anticipating an increase in orders for the coming months.

PMA June 2020 Business Conditions Report Shows Optimism for Improved Conditions

The Precision Metalforming Association's latest report shows members expect an improvement in business conditions with 57% anticipating an increase in orders.

De Vertex

Design & Engineering Insights: Vertex 3D Collaboration Platform Eases Access to Engineering Data

Vertex's collaboration platform converts engineering information into a 3D geometry which can be made available to all teams at a company needing access to the data.

The digital twin factory is based on real-time data, and shows what is happening in the 'real' factory so operators and management can make fact-based decisions.

COVID-19 to Accelerate Digitalization in Manufacturing

The COVID-19 pandemic has brought to light the need to further digitalize manufacturing facilities and remove silos, says Kari Terho of Elisa Corp.

NI's engineering tools aid with the testing and development of various systems in a variety of industries.

National Instruments Introduces New Brand Identity

Now known as NI, the company is reaffirming its commitment to providing engineering solutions and to those who utilize them.

IMTS balloon welcoming everyone to IMTS 2018 from McCormick Place Square.

IMTS Cancelled, Virtual Events Planned in its Place

The International Manufacturing Technology Show has cancelled its 2020 show due to ongoing concerns regarding COVID, but will offer digital events in the coming months.

Ewdm G Bd5 1920 5edf8f33449bc

Design & Engineering Insights: Grid Raster Sees Growth in Use of AR/VR to Reduce Development Time

Grid Raster has seen use of augmented and virtual reality increase in the past 18 months as the technology has improved and use cases have evolved.

Ricardo's partnership with Excel Engineering will provide expanded engine and vehicle testing capabilities.

Ricardo Partners with Excel Engineering on Test and Prototyping Services

The partnership with Excel Engineering will accelerate Ricardo's direct North American research and development activities throughout the transportation sector.

All of Daimler Trucks North America's manufacturing operations have now reopened.

DTNA Resumes Manufacturing Operations, Sees Increase in Freight Activity

Daimler Trucks has observed weekly mileage of its telematics-connected trucks increasing and projects a return to pre-crisis levels by the end of June.

Infrastructure investment will help the equipment manufacturing industry and overall U.S. economy.

AEM Calls for Bipartisan Effort in Passing Surface Transportation Bill

AEM President Dennis Slater says investing in our nation’s infrastructure benefits all Americans and the government should prioritize providing long-term funding for critical infrastructure modernization.