Donaldson Company Inc., a leading, worldwide manufacturer of filtration systems and parts, will showcase a range of the company’s Clean Fuel & Lubricant Solutions at the upcoming 2014 Automechanika Show later this month.
Up until now, almost all filtration systems installed on bulk fuel storage tanks were placed on the fuel dispenser side – downstream of the tank. While filtering at this location is critical, it fundamentally ignores the opportunity to remove most of the contaminants that are present in the fuel/oils being delivered, prior to storage in bulk tanks. Why not reduce the risk that a contaminated load of fuel or oil can further contaminate the fluids already located in your bulk storage tank? Inlet filters significantly reduce the level of contaminants entrained in the fuel/oils before it enters the tank and provide the best opportunity for optimal filtration performance.
The Donaldson Clean. Protect. Polish concept provides you an easy and clean solution:
- Clean. Donaldson single-pass filtration on the inlet can be configured for high flow rates while maintaining low pressure drop and reducing contaminants to the desired cleanliness level.
- Protect. The Donaldson T.R.A.P. Breather prevents dust and moisture from entering fluid storage tanks while allowing high flow rates of fluid in and out of the tank.
- Polish. Because unstable fluids and the tank itself can be sources of contamination, final filtration on the outlet ensures that targeted ISO cleanliness levels are achieved.
Donaldson will be located in Hall 5.0 Booth D45 at 2014 Automechanika Show, September 16 to 20, 2014, held in Frankfurt, Germany.