How Lubricant Choice Can Contribute to Your Sustainability Goals

As OEMs look to move cleaner—spurred by internal goals and governmental regulations—there is opportunity to improve efficiency via engine oil specification.

Adobe Stock 255321623
©artegorov3@gmail – stock.adobe.com

Throughout this century, “sustainability” has evolved from something of a niche interest for global brands to an absolute necessity.

Take, for example, research conducted last year by the National Retail Federation and the IBM Institute for Business Value, which concluded that sustainability has reached a “tipping point.” Per the report:

As consumers increasingly embrace social causes, they seek products and brands that align with their values. Nearly six in 10 consumers surveyed are willing to change their shopping habits to reduce environmental impact. Nearly eight in 10 respondents indicate sustainability is important for them. And for those who say it is very/extremely important, over 70% would pay a premium of 35%, on average, for brands that are sustainable and environmentally responsible.

For the retail brands that this research highlights, there is a trickle-down effect at play. Sustainability is about more than developing more recyclable or eco-friendly products and services. It’s about how they conduct their business more sustainably from top to bottom. Sourcing raw materials and managing supply chains efficiently is a major part of doing so—and it’s here that the trucking industry, including fleet and logistics suppliers and OEMs responsible for developing efficient vehicle technology, has an important role to play.

For OEMs in particular, the pressure comes from multiple angles. End users want trucks that can deliver new levels of efficiency, all while global governments continue to ramp up regulatory efforts to dramatically curb greenhouse gas emissions in the coming decades. For example, phase two of the EPA’s Greenhouse Gas Emissions and Fuel Efficiency Standards becomes effective in model year 2021, phasing in through 2027. Each phase will require larger gains in fuel economy and greater emissions reductions. It’s a time of significant change—one that will require innovation at every level of vehicle design to navigate successfully.

There is one route to developing highly-efficient trucks to satisfy a range of converging sustainability demands that should not be overlooked: High-performing, low-viscosity engine oil technology. Here’s how it can be an effective tool for OEMs pursuing heightened sustainability goals in the future.

FA-4 formulations can help ensure that heavy-duty trucks work for an extensive period of time.FA-4 formulations can help ensure that heavy-duty trucks work for an extensive period of time.The Lubrizol Corporation

An effective way to improve fuel economy

Lower-viscosity lubricants' impact on fuel economy has been clear for some time, and it’s part of why  the American Petroleum Institute introduced the FA-4 service category (in addition to CK-4) in 2016. According to “Trucking Efficiency Confidence Report: Low-Viscosity Engine Lubricants,” a joint report from the North American Council for Freight Efficiency and Carbon War Room, the benefits are clear: “Class 8 over-the road fleets can realistically expect fuel savings in the range of 0.5 to 1.5% by switching from [CK-4] 15W-40 to 5W/10W-30 engine oil.” FA-4 certified lubricants can bring even further benefits. “The savings from switching to the fuel-efficient FA-4 variant...can be expected to add a further 0.4 to 0.7% of increased fuel efficiency,” according to the report.

Taken across the lifetime of the vehicle, which may see more than a million miles on the road before it is taken out of service, FA-4 could contribute to a 10-12 ton reduction in CO2. Projected across an entire fleet, the numbers can add up to significantly lower environmental impact, and can add value in what OEMs are offering to their customers.

Lubrizol have tested API FA-4 lubricants from a variety of OEMs to fully understand its potential benefits.Lubrizol have tested API FA-4 lubricants from a variety of OEMs to fully understand its potential benefits.The Lubrizol Corporation

No compromises on protection

As well as fuel economy gains, low-viscosity lubricant technology has been proven to deliver all of the same protective characteristics as higher viscosity lubricants, like 15W-40.  

In certifying the lubricants, an FA-4 formulation must pass all of the same tests as a comparable CK-4 lubricant. Additionally, the teams at Lubrizol have field tested API FA-4 lubricants in real world units from a variety of OEMs and have generated over 75 million miles of data. Trucks the company has tested include newer models designed to be filled with FA-4 lubricants, as well as older model trucks where FA-4 is not specified by the manufacturer. In each of these cases, the data has remained clear: Engines, old and new, are demonstrating expected levels of wear at up to 500,000 miles of service while demonstrating significant fuel economy improvement.

By providing the highest levels of protection, FA-4 formulations can help ensure that heavy-duty trucks work for an extensive period of time—and therefore, won’t need to be replaced frequently. Trucks that can deliver longer service to end users, with the specified use of FA-4 lubricants, can be a key part of any OEMs sustainability story.

Testing has shown the improved wear levels when using FA-4 lubricants.Testing has shown the improved wear levels when using FA-4 lubricants.The Lubrizol Corporation

Enabling more efficient engine design

In addition enabling higher fuel economy and durability for today’s engines, FA-4 lubricants—and the lower-viscosity formulations that will succeed them in the future—are complementary to some of the more innovative engine design changes that are enabling higher levels of efficiency.

For example, engine combustion is a key area to improve efficiency. To achieve gains here, temperatures around the pistons have become hotter and hotter, requiring enhanced deposit control performance from engine lubricants. Pistons are cooled by squirting oil through the narrow passages of a cooling jet to the underside of the piston. Efficient, effective cooling can be achieved by designing those cooling jets to be used with a low-viscosity lubricant. However, it is essential that this engine then be filled with low-viscosities throughout its life. Higher-viscosity lubricants may not achieve the appropriate flow levels, which can lead to a viscous cycle of deposit buildup and increased heat levels. Delivering a high-rate of lubricant flow to the pistons allows for more effective control heat levels and deposits, helping the engine achieve the optimum levels of efficiency. FA-4 lubricants can inherently deliver those high rates of flow versus thicker formulations.  

Sustainability—for OEMs, their customers, and global supply chains who depend upon them—will become increasingly important in the near- and long-term future, as more challenging regulatory goals are set by government bodies and market expectations. Put simply, selecting and specifying FA-4 lubricants is a readily available and effective method to contribute to those goals today.

This article was written and contributed by Mike Sutton, Corporate Technical Fellow, Lubrizol.

Companies in this article
Latest