HJS9 Dual Axis Contactless Controller

OEM Controls' HJS9 dual axis controller includes on-board short circuit and reverse polarity protection.

January 19, 2015
OEM Controls, Inc.
Oemcontrolsinc Logo 10278790

OEM Controls has introduced the HJS9 dual axis contactless controller featuring state-of-the-art microprocessor technology. 

  • Factory programmable output is proportional within 0 to 10V in ratiometric or absolute configurations
  • Two additional digital outputs per axis available that are programmable in on/off position relative to handle travel
  • Includes on-board short circuit and reverse polarity protection
  • Features auto-calibration capability
  • Operating temperature range is -40 to 70 C
  • Full CE rating included for EMC protection
  • Offers choice of pigtail and connector or terminal strip
  • Power supply voltage range is 7 to 30V
  • Includes CANbus capabilities and environmental coating protection

 

Request More Information
Fill out the form below to request more information about HJS9 Dual Axis Contactless Controller
Latest
By using ergonomic equipment, you’re not only prioritizing operator comfort and preventing injuries, but you’re also increasing efficiency by reducing machine downtime and keeping operators on the job.
6 Considerations When Designing or Selecting an Ergonomic Joystick
The science behind designing a joystick for maximum operator comfort, configurability and durability.
February 24, 2023
Jr Merrit
Joystick with Performance-Driven Handle Design
This new technology will debut during CONEXPO.
February 10, 2023
Lockyer describes the HMI joystick during iVT Expo.
An HMI Joystick Researched for Improved Ergonomics
The shape of this joystick reduces operator fatigue and the risk of repetitive strain. Learn more from the video below recorded during iVT Expo 2022.
September 27, 2022
With the new controls, only two hoses and a wire harness must be run and connected.
New Electronic Controls Reduce Install Time, Streamline Integration of Hydrostatic Tail Winch
A new install package with electronic controls for a hydrostatic tail winch significantly reduced its installation time. It paved the way for near-seamless integration of the controls in the cabs of host machines.
September 12, 2022
Rafi Joyscape Image
RAFI JOYSCAPE Heavy-Duty Joysticks
The JOYSCAPE platform offers optional extras such as illuminated handles for work at night, and capacitive hand detection to avoid operating errors.
December 20, 2021
Xs Series (1)
APEM XS Series Fingertip Joystick
The XS Series fingertip joystick has a low profile design measuring less than 45 mm above panel to easily fit into various applications.
October 30, 2021
Apem Xdrt
APEM RT Handle for XD Series Joystick
The APEM RT grip provides IP67 above-panel sealing and is suited for vehicle applications requiring dedicated right-hand operation.
April 6, 2021
Jsa Single Axis Joystick
Sure Grip Controls JSA Single Axis Joystick
The JSA single axis joystick for Aerial Work Platforms  is compatible with most other single axis joysticks.
February 26, 2021
Jsc Can Series Joystick
Sure Grip Controls JSC CAN Series Joystick
The dual axis JSC CAN Series Joystick was designed and manufactured for the rugged off-road market.
January 13, 2021
Electrum Swx Trim Switch
Electrum SWX 4-Way Miniature Tactile Joystick
The SWX 4-way joystick provides tactile feedback in four directions for improved operator control.
October 29, 2020
Jrmc G58 Handle
J.R. Merritt Controls G56 and G58 Multi-Function Handles
The new G56 and G58 multi-function joystick handles each have their own unique shape and can both be used for left- or right-hand operation.
August 24, 2020
Joystick Djw Per Th E Forestry
Walvoil DJW Joystick
Walvoil is introducing the DJW joystick, which is completely sealed and protected against water and dust ingress, at Agritechnica 2019.
October 17, 2019
Whitepaper: Keys to Off-Highway Equipment Vision Safety
Sponsored
Whitepaper: Keys to Off-Highway Equipment Vision Safety
Learn the key risks to vision safety and solutions to mitigate them on the equipment, on the jobsite and in the office.
April 1, 2024
Xf 55
APEM XF Series Finger Operated Joystick Controller
APEM's XF Series is available with up to three proportional axis and two momentary pushbuttons.
July 9, 2019
Otto Jhm Joystick
OTTO JHM Industrial Hall Effect Joystick
The JHM Industrial Hall Effect Joystick features 18 output configuration choices and nine gating options.
May 28, 2019
With the new joystick steering system for Liebherr wheel loaders, the position of the joystick always corresponds to the respective articulation angle of the wheel loader.
New Joystick Steering and Intelligent Assistance Systems for Liebherr Wheel Loaders
At bauma 2019, the company introduced joystick steering for wheel loaders which enable the operator to steer accurately and without fatigue.
April 25, 2019
Caldaro Joins UN Global Compact
Caldaro is one of several organizations around the globe which has signed the 10 principles of the initiative, regarding the areas of respect for human rights, labor conditions, environment and anti-corruption.
April 15, 2019
Apem Xd Series
APEM Introduces New Configuration Options for XD Series Joystick
New options include single axis operation, higher operating torques and dual Hall effect thumbwheels.
April 8, 2019
elobau JS Heavy-Duty, Single Axis Joystick
elobau's JS joystick Features new glass fiber reinforced polymer designed to give weight reduction of 300 g (0.7 lbs.) from diecast versions
February 11, 2019
Walvoil Xmh Handle
Walvoil XMH Handle
The XMH handle is an ergonomic middle size handle with soft touch coating for a comfortable hand grip.
February 4, 2019
Walvoil Svm980
Walvoil SVM980 Hydraulic Pilot Control Valve
The SVM980 manages and regulates high flow rates due to large diameters of spools.
February 1, 2019
Walvoil Hjw Joystick
Walvoil HJW Heavy-Duty Joystick
The HJW Hall Effect joystick is completely sealed to IP67/IPx9K standards.
February 1, 2019
One of the appreciated features of ViperXT is the true two-component molded grip, the result of an advanced molding procedure which combines two automotive engineering plastics and also bonds them strongly to one another. It provides a strong base structure with a semi-soft skin for more control and comfortability as well as an utterly tight encapsulation.
Caldaro ViperXT Joystick Grip
The latest addition to the Viper family is ViperXT – a joystick grip allowing up to three analog controls, of which two can be used simultaneously.
November 26, 2018
Apem Xd Series (2)
APEM XD Series Multi-Axis Hand Grip Joystick
APEM's XD Series joystick features a handle which utilizes a uni-body construction with modular inserts to provide design flexibility.
September 10, 2018