Cole Hersee's 48540 FlexMod Smart Battery Isolator Controller monitors two battery banks and controls one or more relays or contactors to make sure starting power is protected by isolating the starting and auxiliary battery banks.
- Preserves starting battery voltage by isolating auxiliary battery when system voltage drops below 12.7V and automatically reconnects battery banks at 13.2V
- Turns any electromechanical solenoid or relay into a Smart Isolator
- Includes auto-ranging capabilities to sense 12V or 24V systems
- Ultra low 1mA standby current means minimal battery drain when vehicle is in storage or not in use
- Sealed to IP67 standard, ensuring resistance to water, dust and vibration
- Compact design (4 in. x 3 in. x 1 in.)
- Mounts anywhere on a vehicle, even places where road-splash is a problem
- Compatible with modern electronically controlled alternators
- Status light output drives remote light, informing operator when banks are connected
- Rated for more than 1,000,000 on-off cycles for operation over lifetime of vehicle
Request More Information
Fill out the form below to request more information about 48540 FlexMod Smart Battery Isolator Controller