Hemisphere GNSS S321+ and C321+ GNSS Smart Antennas

Hemisphere's multi-GNSS S321+ and C321+ GNSS smart antennas support 394 channels and simultaneously track all satellite signals.

September 26, 2017
Hemisphere GNSS Inc.
Hemisphere Gnss

Hemisphere GNSS Inc. announces the release of its next-generation multi-frequency, multi-GNSS S321+ and C321+ GNSS smart antennas.

  • Powered by Eclipse P326 OEM board
  • Support 394 channels and simultaneously tracks all satellite signals including GPS, GLONASS, BeiDou, Galileo, and QZSS
  • Comes standard with two long-life lithium batteries providing up to 12 hours of operation
  • Batteries are hot-swappable, allowing them to be changed without stopping work
  • Combines Hemisphere’s Athena GNSS engine and Atlas L-band correction technologies with new webUI, offering high level of customer-friendly performance 
  • Ruggedized desig for use in challenging environments
  • Meets IP67 standard requirements
  • Available in two versions, with 4G LTE optimized for either North American or international locations 
  • Provides centimeter-level RTK
  • Athena GNSS excels in virtually every environment where high-accuracy GNSS receivers can be used
  • Ships pre-configured to test-drive corrections from Hemisphere’s Atlas L-band correction service
Request More Information
Fill out the form below to request more information about Hemisphere GNSS S321+ and C321+ GNSS Smart Antennas
Latest
Agco Trimble Id Ee44ea16f98c Logo
AGCO & Trimble Close Joint Venture, Form PTx Trimble
PTx Trimble combines Trimble's precision agriculture business and AGCO's JCA Technologies to form a new company that will serve farmers with factory fit and retrofit applications in the mixed-fleet precision agriculture market.
April 4, 2024
Septentrio Anta Rx Si3 Gnss Ins Smart Antenna Receiver Imu All In One
Septentrio Introduces AntaRx-Si3 Inertial GNSS Smart Antenna
The new GNSS/INS receiver uses FUSE+ technology to combine high-accuracy GNSS positioning with an IMU in the same enclosure as the GNSS antenna.
February 13, 2024
Danfoss Power Solutions’ latest addition to its PLUS+1 Connect system is a remote service pass offering for its CS10 wireless gateway. Remote service passes enable machine technicians to remotely monitor machine behavior, debug and update firmware over the air, reducing machine downtime and eliminating technician travel costs.
Telematics and Connectivity for Component OEMs
This data and connectivity are no longer an option for OEMs but a requirement.
January 9, 2023
Our team with the Perkins team
bauma Day One: Technology, Electrification, Connectivity and Collaboration
Despite the rain, the halls and outdoor fair were filled with attendees eager to see the latest equipment and technologies.
October 24, 2022
An operator using machine control
How GPS and Other Tech Boost Productivity and Safety
Using GPS functionality on construction equipment to automate tasks is becoming more common, and some OEMs have made these features standard on new equipment.
October 3, 2022
Software and hardware can extend equipment life and improve jobsite safety.
Employing Vehicles with Aftermarket Automation Keeps Existing Fleets on the Road
How COM Express software for small footprints fuels the extended deployment, long life cycle, and value of today’s heavy mobile equipment
August 16, 2022
Gauge Jackhammer JH-BP2.
Gauge Jackhammer Battery-Powered Tracking Devices
The JH-BP2 tracking device is the first of its kind with rugged durability signaled by its IP69K Environmental Rating and a 17-year battery life.
March 17, 2022
Using its collision avoidance system, Lecia Geosystems can program geofenced obstacles and no go zones in two dimension to protect environmental green zones or any general temporary avoidance zones.
Improved Safety Through Advancements in Object Detection
Technology advancements are better enabling machines to see their surroundings to improve safety in heavy equipment applications.
March 15, 2022
Elevat Iot 6216c02604e02
OEM Construction Equipment Telematics Evolves
Open systems, shared standards, satellite and intelligence are driving new construction equipment business models.
February 24, 2022
Septentrio Aste Rx Sb3 Pro Ruggedized Gnss Receiver
Septentrio AsteRx SB3 GNSS Receivers
AsteRx SB3 GNSS receivers offer optimal availability of RTK high-accuracy positioning due to its ability to track a wide variety of signals from all currently operating Global Navigation Satellite Systems.
August 7, 2021
Volvo Active Control uses drive-by-wire technology to provide semi-autonomous operation of digging functions.
Technology Advancements Improve Accuracy and Reliability of Autonomous Systems
Development of new components are increasing the safety and performance of autonomous vehicles and systems.
February 5, 2021
Yanmar has helped develop two prototype agricultural robots, one for grapevines and the other spinach.
Mobile Robot Use Cases Grow as Technology Advances
Robots are becoming more commonplace in the off-road equipment market as sensor, GPS and other automation-enabling technologies continue to improve.
August 18, 2020
Septentrio Mosaic H Gnss Module With Heading Front Back 650x650
Septentrio mosaic-H Dual Antenna GPS/GNSS Receiver
Septentrio's mosaic-H dual antenna GPS/GNSS receiver provides heading and pitch or heading and roll information for use in autonomous solutions.
November 4, 2020
Septentrio Aste Rx M3 Pro Gnss Receiver
Septentrio AsteRx-m3 Pro GPS/GNSS Receiver Board
The AsteRx-m3 Pro receiver tracks signals from all available GNSS constellations on three frequencies.
October 22, 2020
Septentrio Aste Rx M3 Gnss Receiver
Septentrio AsteRx-m3 High-Precision GNSS Receivers
Septentrio's AsteRx-m3 GNSS receivers deliver centimeter-level accuracy and are available in three models to meet various application needs.
October 16, 2020
Septentrio Aste Rx M2 Sx Autonomous Tractor
Septentrio AsteRx-m2 Sx GPS/GNSS Receiver
The Septentrio AsteRx-m2 Sx GPS/GNSS Receiver offers always-on sub-decimeter accuracy without the need for additional correction service subscriptions.
June 23, 2020
New updates for John Deere 5R Tractors include an optional 16/16 CommandQuad Auto Transmission.
John Deere Introduces Enhanced Version of AutoTrac Guidance for 5R, 6M Tractors
John Deere 5R or 6M Tractors can now be ordered with an AutoTrac guidance screen built into the tractor’s corner-post display.
June 8, 2020
Base Finder
Septentrio Introducing High-Accuracy GNSS Positioning Technology
Septentrio will integrate Sapcordato's SAPA Premium corrections into its latest GNSS receiver technology to provide sub-decimeter accuracy right out of the box.
May 20, 2020
Thumbnail Image001
Trimble Deploys Coast-to-Coast U.S. Coverage for CenterPoint RTX Fast Correction Service
One-inch GNSS accuracy in under a minute enables the Trimble technology to deliver seamless high-precision performance across the U.S. and southern Canada.
May 7, 2020
Gnss Ins Receiver Board
Septentrio AsteRx SB ProDirect Heading GPS/GNSS Receiver
The AsteRx SB ProDirect GPS/GNSS receiver can easily be integrated into any machine monitoring or control system.
March 4, 2020
Gps
CM Labs Adds GPS Feature to Excavator Simulator Training Pack
The system immerses operators in a life-like work site environment that challenges them to dig trenches using the new GPS guidance system, while learning to make decisions based on accurate grade and terrain.
February 25, 2020
Open Rtk Module2 Jpeg Small
ACEINNA OpenRTK330L Triple-Band RTK/GNSS Receiver
The ACEINNA OpenRTK330L RTK/GNSS receiver features built-in triple redundant inertial sensors to provide a compact navigation system.
January 7, 2020
Trimble Reports Second Quarter 2019 Results
Results were in line with guidance and 12 month operating cash flow was up 23%.
August 2, 2019
Hemisphere GNSS Lyra II Digital and Aquila Wideband RF ASIC Platforms
The Lyra II digital ASIC and Aquila wideband RF ASIC provide the ability to track and process over 700 channels from all GNSS constellations and signals.
June 4, 2019