Master Bond Polymer System EP37-3FLF

Master Bond Plymer System EP37-3FLF is clear, flexible and cures at room temperature

Ep373flf Lr 10248122
Grey Red2line270x49 10342602

Master Bond developed Polymer System EP37-3FLF as an optically clear two component epoxy with resistance to cryogenic temperatures and severe thermal cycling. Its low exotherm also makes it a superb potting, encapsulating and casting system, especially where wider cross section thicknesses are specified. Its unique combination of properties allows it to cure without stressing delicate electronic components.

  • Serviceable over wide range of 4K to 250F
  • Cures at room temperature in 2 to 3 days or faster at elevated temperatures
  • Offers 1 to 1 mix ratio by weight or volume
  • Has low mixed viscosity of 1,400 to 1,500 cps
  • Workable with 100 gram mass of adhesive at room temperature for up to 90 minutes
  • Bond shear strength exceedes 2,000 psi
  • Features T-peel strength of 25 pli
  • Has an elongation of 180% and electrical insulation properties with a volume resistivity of 1x1014 ohm-cm
  • Bonds to a variety of substrates including metals, glass, ceramics, rubbers and many plastics 
  • Sold in pint, quart, gallon and 5 gallon container kits and has 6 month shelf life if unopened and stored at room temperature

 

 

Request More Information
Fill out the form below to request more information about Master Bond Polymer System EP37-3FLF
Latest