Developed for potting and encapsulation applications where an addition cured silicone cannot be used, Master Bond MasterSil 152 is a two component, condensation curing system that only requires air for complete cross-linking.
- Does not include substrates that will inhibit the cure
- Fully cures at room temperature in 24 to 48 hours and has low exotherm
- Features low shrinkage upon curing
- Offers 10-to-1 mix ratio by weight and delivers a long working life of 6 to 8 hours after mixing
- Combines low viscosity and electrical insulation properties with the ability to cure in sections exceeding one inch in thickness
- Widely used in electronic and optical components
- Optically clear and can transmit light well from 220 to 2,500 microns
- Features index of refraction of 1.45
- Highly flexible and withstands thermal cycling and shock
- Resistant to water and is serviceable over the broad temperature range of -65 to 400 F
- Available in 1/2 pint, pint, quart, gallon and 5 gallon container kits
- Master Bond Low Viscosity Systems
Request More Information
Fill out the form below to request more information about MasterSil 152 Two-Component Condensation Curing System
