Hemisphere GNSS Vector VR500 Rugged All-in-One Smart Antenna

Introduced at CONEXPO 2017, the Vector VR500 All-in-One Smart Antenna from Hemisphere GNSS provides heading accuracy up to 0.2 degrees.

March 28, 2017

Hemisphere GNSS Inc.

Hemisphere Antenna 58d9314314a5a 58daae76d9e16

Hemisphere GNSS Inc. announces the release of the Vector VR500 Rugged All-in-One Smart Antenna.

Designed specifically for harsh machine control environments
Multi-frequency, multi-GNSS design
Helps equipment manufacturers deliver their own machine control and guidance solutions
Provides heading accuracy up to 0.2 degrees
Integrated UHF radio
Updates up to 50Hz
Meets stringent IP ingress and MIL-STD202G shock and vibration requirements
Fully scalable
Tracks GPS, GLONASS, BeiDou, Galileo, QZSS, and IRNSS, and is also Atlas L-band and SBAS capable
Connects with just one cable supporting integration of CANbus and UHF RTK radio with position and heading messages
Easy-to-use webUI allows user to control, manage and upgrade firmware and activations using Wi-Fi
Connectivity options allow corrections to be received via radio, Bluetooth, Wi-Fi, and Serial
Powered by Athena GNSS engine, providing centimeter-level RTK
Athena excels in virtually every environment where high-accuracy GNSS receivers can be used
Performance with long baselines, in open-sky environments, under heavy canopy, and in geographic locations experiencing significant scintillation
Integrated L-band adds support for Atlas GNSS global corrections for meter to sub-decimeter level accuracy
New Tracer technology helps maintain position during correction signal outages
Uses Hemisphere’s aRTK technology, powered by Atlas, allowing operation with RTK accuracies when RTK corrections fail
If Atlas-subscribed, will continue to operate at subscribed service level until RTK is restored

Fill out the form below to request more information about Hemisphere GNSS Vector VR500 Rugged All-in-One Smart Antenna

Volvo Active Control uses drive-by-wire technology to provide semi-autonomous operation of digging functions.

Technology Advancements Improve Accuracy and Reliability of Autonomous Systems

Development of new components are increasing the safety and performance of autonomous vehicles and systems.

Yanmar has helped develop two prototype agricultural robots, one for grapevines and the other spinach.

Mobile Robot Use Cases Grow as Technology Advances

Robots are becoming more commonplace in the off-road equipment market as sensor, GPS and other automation-enabling technologies continue to improve.

Septentrio Mosaic H Gnss Module With Heading Front Back 650x650

Septentrio mosaic-H Dual Antenna GPS/GNSS Receiver

Septentrio's mosaic-H dual antenna GPS/GNSS receiver provides heading and pitch or heading and roll information for use in autonomous solutions.

Septentrio Aste Rx M3 Pro Gnss Receiver

Septentrio AsteRx-m3 Pro GPS/GNSS Receiver Board

The AsteRx-m3 Pro receiver tracks signals from all available GNSS constellations on three frequencies.

Septentrio Aste Rx M3 Gnss Receiver

Septentrio AsteRx-m3 High-Precision GNSS Receivers

Septentrio's AsteRx-m3 GNSS receivers deliver centimeter-level accuracy and are available in three models to meet various application needs.

Septentrio Aste Rx M2 Sx Autonomous Tractor

Septentrio AsteRx-m2 Sx GPS/GNSS Receiver

The Septentrio AsteRx-m2 Sx GPS/GNSS Receiver offers always-on sub-decimeter accuracy without the need for additional correction service subscriptions.

New updates for John Deere 5R Tractors include an optional 16/16 CommandQuad Auto Transmission.

John Deere Introduces Enhanced Version of AutoTrac Guidance for 5R, 6M Tractors

John Deere 5R or 6M Tractors can now be ordered with an AutoTrac guidance screen built into the tractor’s corner-post display.

Base Finder

Septentrio Introducing High-Accuracy GNSS Positioning Technology

Septentrio will integrate Sapcordato's SAPA Premium corrections into its latest GNSS receiver technology to provide sub-decimeter accuracy right out of the box.

Thumbnail Image001

Trimble Deploys Coast-to-Coast U.S. Coverage for CenterPoint RTX Fast Correction Service

One-inch GNSS accuracy in under a minute enables the Trimble technology to deliver seamless high-precision performance across the U.S. and southern Canada.

Gnss Ins Receiver Board

Septentrio AsteRx SB ProDirect Heading GPS/GNSS Receiver

The AsteRx SB ProDirect GPS/GNSS receiver can easily be integrated into any machine monitoring or control system.

Gps

CM Labs Adds GPS Feature to Excavator Simulator Training Pack

The system immerses operators in a life-like work site environment that challenges them to dig trenches using the new GPS guidance system, while learning to make decisions based on accurate grade and terrain.

Open Rtk Module2 Jpeg Small

ACEINNA OpenRTK330L Triple-Band RTK/GNSS Receiver

The ACEINNA OpenRTK330L RTK/GNSS receiver features built-in triple redundant inertial sensors to provide a compact navigation system.

Trimble Reports Second Quarter 2019 Results

Results were in line with guidance and 12 month operating cash flow was up 23%.

Hemisphere GNSS Lyra II Digital and Aquila Wideband RF ASIC Platforms

The Lyra II digital ASIC and Aquila wideband RF ASIC provide the ability to track and process over 700 channels from all GNSS constellations and signals.

Sokkia Grx3

Sokkia GRX3 GNSS Integrated Receiver

The GRX3 is designed as a 'future-proof' solution with Universal Tracking Channels technology that automatically tracks signals from all available and planned constellations, including GPS, GLONASS, and Galileo.

New Version of Trimble Earthworks Grade Control Platform Includes Support for Motor Graders and Automatic Guidance for Tiltrotators

Full Family of Machine Types Now Available on the Trimble Earthworks Platform

Trimble Reports Third Quarter 2018 Results

Trimble's third quarter revenue was up 18% compared to the previous year.

524399

Case IH Adds Galileo Satellite Connectivity for AFS RTK+ Users

Case IH AFS RTK+ users will benefit from the reduced likelihood of signal loss with the addition of the Galileo satellite network.

AGCO's IDEAL combine’s approach to automation blends harvesting performance benchmarks and necessary combine settings, enhancing ease of harvest for expert operators and improving efficiency of new operators. Learn more about the IDEAL combine at www.oemoffhighway.com/21008705.

Ripe for Technological Investment

In the near term, ag equipment production is set to contract, but long-term growth opportunity lays in smart farming technology.

Trimble Reports First Quarter 2018 Results

Trimble first quarter revenue was up 22% compared to 2017, with revenue increases reported in each business segment.

Topcon Hosts Infrastructure and Technology Summit

During its Technology Roadshow, Topcon recently hosted a select group of experts to present highlights of new technology that allow for the smarter and faster achievement of infrastructure goals.

Trimble Reports Fourth Quarter and Full Year 2017 Results

Trimble fourth quarter revenue was up 21%, and full-year revenue up 12%; the company expects first quarter 2018 revenue to increase between 14 and 19% on a year-over-year basis.

Front Panel Alloy

Trimble Alloy GNSS Continuously Operating Reference Station Receiver

The Trimble Alloy GNSS receiver has 672 channels for GNSS constellation tracking and is IP68 rated for use in harsh operating conditions.

Topcon Roadshow Truck

Topcon 2018 Technology Roadshow Kicks off End-User Training Tour in Multi-Day Stops Across North America

The Topcon Technology Roadshow showcases the latest construction, survey, civil engineering, architecture and design technologies in a hands-on educational environment.