SSAB

SSAB is a leading producer of high strength steel. The company has a 6 million tonne capacity for crude steel. The company’s sale of niche products – the high strength steels – amounts to approximately 37% of the total sales.

PO Box 70
Klarabergsviadukten 70, D6
Stockholm
Sweden
http://www.ssab.com
Phone:+46 8 45 45 700
Request More Information
Fill out the form below to request more information about SSAB
Related
Phil Hi Temp 1
PHIL Offering SSAB Hardox HiTemp Steels for Hot Slag Applications
May 21, 2020
Philippi-Hagenbuch will use the HiAce material in three areas of its business, for Water Tanks, HiVol Refuse Bodies and Bio-Solid/Mulch HiVol Bodies.
PHIL Offering SSAB Hardox HiAce Steels for use in Acidic Environments
May 6, 2020
Hardox HiAce drastically slows down the oxidation process, allowing the full hardness of the material to counteract wear.
PHIL Offering Additional SSAB Hardox Steels on Truck Bodies
March 20, 2020
Hqdefault 5a81a6a88765e
Technology News Tracker: Fossil-Free Steel Production
February 15, 2018
More from SSAB
Hybrit Facility
HYBRIT Fossil-Free Steel Initiative Set to Create Demonstration Plant on Industrial Scale
The SSAB, LKAB and Vattenfall are looking for a location for the demonstration plant for its joint venture HYBRIT which aims to create a fossil-free steel production process.
June 1, 2020
Phil Hi Temp 1
PHIL Offering SSAB Hardox HiTemp Steels for Hot Slag Applications
SSAB Hardox HiTemp steel is capable of transporting materials in excess of 1,200 F and will be used in PHIL's customized Hot Slag Bodies.
May 21, 2020
Philippi-Hagenbuch will use the HiAce material in three areas of its business, for Water Tanks, HiVol Refuse Bodies and Bio-Solid/Mulch HiVol Bodies.
PHIL Offering SSAB Hardox HiAce Steels for use in Acidic Environments
Philippi-Hagenbuch will use the HiAce material for three types of vehicles structures, its Water Tanks, HiVol Refuse Bodies and Bio-Solid/Mulch HiVol Bodies.
May 6, 2020
Hardox HiAce drastically slows down the oxidation process, allowing the full hardness of the material to counteract wear.
PHIL Offering Additional SSAB Hardox Steels on Truck Bodies
Philippi-Hagenbuch is now using the new SSAB Hardox HiTemp steel in its customized Hot Slag Bodies and HiAce steel for products operating in acidic environments.
March 20, 2020
SSAB's Raahe mill will act as the pilot plant for the Energy4HYBRIT pre-feasibility study.
SSAB to Offer Fossil-Free Steel by 2026
SSAB has set out new strategic targets which include ramping up its fossil-free steel production capabilities.
December 4, 2019
Ssab Hardox Hi Ace Garbage Truck Driving
SSAB Hardox HiAce Abrasion-Resistant Steel Wear Plate
The SSAB Hardox HiAce wear plate withstands acidity and corrosion for use extreme working conditions.
November 13, 2019
SSAB Reports Third Quarter Results
A weak market impacted SSAB Europe, while SSAB Americas held up well.
October 28, 2019
Ssab Hybrit Fossil Free Steel Production
HYBRIT Receives Investment in Pilot Plant for Fossil-Free Steel Production
A new hydrogen gas storage facility will be built near the pilot plant to demonstrate a cost-effective, emissions-free method of producing steel.
October 4, 2019
Ssab Swedish Steel Prize2019
Finalists of Swedish Steel Prize Announced
Four designs utilizing steel in new and unique ways are being considered for the annual prize awarded by SSAB.
October 3, 2019
SSAB Joins Leadership Group to Reduce Industrial Emissions
The Leadership Group will work towards accelerating transition of all industry sectors to low carbon pathways in line with the goals of Paris Agreement.
September 24, 2019
Ssa Bat Un
SSAB to Advocate for Net Zero Emissions at UN Climate Week
SSAB and its partners of the HYBRIT initiative will discuss the possibility of reaching net zero emissions in the iron and steel industry and energy sector.
September 19, 2019
SSAB Acquiring Abraservice
The acquisition will enable the company to extend its quenched and tempered steels offering for OEMs and end users.
July 25, 2019
APD connectors – Engineered for the Toughest Challenges
APD connectors – Engineered for the Toughest Challenges
ITT Cannon’s APD Series is a full plastic harsh environment connector solution available in 1 to 51-way variants. Engineered for the toughest challenges, it provides a proven, cost-effective, and high-quality solution for off-highway applications.
May 21, 2020
Swedish Steel Prize 2019 Now Open for Entry
Applications are now being accepted for the Swedish Steel Prize 2019, and are due by August 15.
May 3, 2019
SSAB Reports First Quarter 2019
The company saw strong earnings improvement in the Americas and special steels during the quarter.
April 25, 2019
B2b8ede270eb34b3 Org
SSAB Showcases Productivity Apps at bauma 2019
The apps help customers do the math and add up the savings when using SSAB’s high-strength steels Hardox wear plate and Strenx performance steel.
April 11, 2019
Industrias Baco Hardox500 Tuf
SSAB Exhibiting New Hardox 500 Tuf Wear Plate at bauma 2019
Hardox 500 Tuf delivers high wear resistance and is tough enough to perform as a structural wear plate.
February 15, 2019
90263e1f3c9bcdd6 Org
SSAB EcoUpgraded Program Reduces Weight and Emissions
Customers can upgrade to high-strength steel and reduce the weight of their equipment, improve fuel economy and extend product lifetime, all of which helps reduce their carbon footprint.
February 14, 2019
SSAB Releases 2018 Financial Report
The company reports continued earnings improvement, strong cash flow and a proposed higher dividend.
January 29, 2019
SSAB Announces Winners of SmartSteel Innovation Challenge
A shared victory between Fraunhofer Institute IPM from Germany and Luleå University of Technology from Sweden, who both came up with ideas on how to trace steel products by using the materials own characteristics.
December 17, 2018
Ssab Strenx1100 Plus
SSAB Strenx 1100 Plus Strip Steel
Introduced at bauma China 2018, SSAB's Strenx 1100 Plus steel features improved weld seam strength to contribute to lighter, yet stronger equipment.
November 27, 2018
SSAB to Invest in Increased Q&T Steel Production Capacity
The investment in quenched and tempered steels production will increase the annual capacity at its Mobile, AL, facility from 300,000 tonnes to 400,000 tonnes.
October 31, 2018
SSAB Releases Third Quarter 2018 Results
SSAB Americas leads the continued earnings improvement for the group which saw an increase in sales compared to the same period the previous year.
October 30, 2018
Ssab Domex Plus
SSAB Domex Plus
SSAB's Domex Plus is suited for stamping, punching, slitting and complicated die forming.
October 24, 2018