Yanmar will exhibit its all-new gas-powered and diesel-powered industrial engines at the world’s largest exhibition for construction equipment, bauma 2019. Over April 8-14, Yanmar will for the first time show its 4TN88G and 4TN98G gas-powered engines. Furthermore, Yanmar will be showing its latest entries into the high-power diesel range, up to 155 kW, with the 4TN101 and 4TN107. Rounding out the show will be L series of industrial diesel engines - a workhorse that meets the needs of a diverse range of customers.
“Each model showcased at bauma 2019 is our promise to meet the distinct needs of our different customers,” says Carlo Giudici, Sales Director, YANMAR Europe industrial powertrain. “We continue to maximize the life cycle value of customers by expanding our product line-up, enhancing existing products, and maintaining a high quality of services.”
New Models at bauma 2019
Industrial Gas Engine: 4TN88G, 4TN98G
The two newly developed models, which run on LPG (liquid petroleum gas) and are compliant with U.S. EPA 1 Tier 2, CARB 2 Tier 4 and EU Stage V emissions regulations, are being shown at bauma 2019 for the first time. Maximum output: 4TN88G: 45.0kW, 4TN98G: 63.0kW.
The addition of these clean burning, low noise engines allows Yanmar to strengthen its product portfolio. Furthermore, Yanmar has plans to introduce bi-fuel specification models that can run on both LPG and gasoline.
Gas engines produce very little PM (particulate matter), and are comparatively quieter than diesels. This makes them ideal for work indoors and in enclosed areas, where environmental concerns are a major consideration.
Yanmar has more than 30 years of experience working with gas engines. This long-earned experience together with our deep knowledge of industrial diesel engine technology has allowed us to develop a proprietary gas combustion system for high output, fuel efficient and compact engines that display the durability and reliability required of industrial applications.
Yanmar can now provide customers with a “One-Stop Solution”, whereby Yanmar can offer either a diesel or gas power source in one-sales contact, with maximum compatibility to the customer’s equipment.
Industrial diesels with a maximum output of 155 kW
The two new high-output, industrial diesels that made their world debut at Intermat in Paris in April 2018: the 4TN101 (maximum output: 105 kW) and the 4TN107 (90-155 kW) with two-stage turbocharger, will be shown once again at bauma. This time, the 4TN107 with single-stage turbocharger will, for the first time, feature its DOC＋DPF＋SCR emissions aftertreatment system.
The aftertreatment system utilizes Yanmar’s proprietary DPF regeneration technology already successfully fitted to the common rail TNV series and renowned for its reliability. Yanmar has also developed a mixer-less SCR solution which results in lower back pressure than the mixer configuration and consequently allows more freedom in the designing of the exhaust tail pipe on the vehicle.
The standard aftertreatment units are a compact design to match the width of the engine which allows Yanmar to offer a range of optimum layout options for different construction equipment, agricultural equipment and materials handling applications. The configuration of the device simplifies customers’ design requirements for the engine’s installation to equipment, while improving external accessibility, and the fact that no special service tools are required results in reduced maintenance time and increased uptime for customers.
European Stage V Emissions Regulations Compliant L-V Series of Air-Cooled Industrial Diesel Engines
From the first sales of the L Series in 1983, the world’s smallest and lightest air-cooled industrial diesel engine has been praised for its outstanding performance in compact construction equipment, agricultural equipment and for power generation.
Now, the L48V (maximum output: 3.4 kW) has been redeveloped to achieve European Stage V emissions certification.
To meet the new strict regulation limits for below 19 kW range in a bore of only 70 mm, the L48V utilizes a proprietary fuel injection technology based on Yanmar’s direct injection system, together with a diesel oxidation catalyst (DOC), while maintaining the reliability and fuel efficiency the engine is well known for.
Not only the new L48V, but also the L70V (maximum output: 4.8 kW) and L100V (maximum output 6.8 kW) are certified to EU Stage V by the adaption of an exhaust gas recirculation (EGR) system from the current L-N series. The L-V series will be presented at bauma.
EU Stage V compliant TNM/TNV Series
In addition to the new models featured, we will also be showing a range of the EU Stage V compliant TNM/TNV Series.
With 6 years’ experience in DPF mounted TNV common rail engines in the over 19 kW class and over 400,000 units in the market, Yanmar’s proprietary DPF regeneration technology prevents clogging of the DPF and has been widely recognized worldwide as the most reliable aftertreatment system in its category.
EU Stage V emissions regulations come into effect from 2019 at the range of below 56 kW and 2020 at the range of 56-130 kW. Yanmar engines that need the addition of a DPF to meet these standards, will employ Yanmar’s highly reliable DPF system.
With the new engine lineup and the TNM/TNV series, Yanmar is well placed to meet the needs of our customers with a versatile range of power solutions.
