"On-Site" Instant Oil Analysis Kit

Fumoto Engineering introduces an instant oil analysis kit that costs $1 per test.

May 18, 2011

Fumoto Engineering of America

Checksheetwithoilstick 10271209

An average lab oil analysis may cost up to $50-60 per test, and over 2-3 weeks waiting time until the results are returned. With this in mind, Fumoto Engineering developed its “on-site” Instant Oil Analysis Kit to offer a fast and cost saving alternative

Provides results within seconds
Offers cost savings of less than $1 per test
Includes chromatographic color chart for diagnos is
Tests oil quality for particle contaminants, depletion of fluid additives, soot content, sludge and varnish, and indication of water fuel, or glycol antifreeze dilution
Test sheet uses media up to 2 micron, offering instant results on gas, diesel, transmission, brake, steering, or any fluid, anytime, anyplace

Fill out the form below to request more information about "On-Site" Instant Oil Analysis Kit

Oem Insights Custom Products 00 02 03 06 still004

New ISO Standard Improves Safety of Forestry Equipment Operators

Custom Products of Litchfield says the new ISO standard establishes a test method designed to ensure the safety of forestry equipment operators.

Oem Insights Dsd 00 08 51 12 still004

Increased Electrification Brings Need for Specialized Testing

Drive System Design continues to expand its testing capabilities for electric vehicles and components as the need for testing and development increases.

Smart Charging Station Emulator

dSPACE Smart Charging Station Emulator

The dSPACE Smart Charging Station Emulator supports international standards for charging communication such as ISO 15118 and DIN SPEC 70121.

Use of dual test benches offers a cost-effective alternative to wind tunnel testing.

Embracing a New Alternative to Wind Tunnel Testing

Use of a dual test bench instead of wind tunnel testing can offer several benefits including lower costs and increased flexibility.

Smart Charging Station Emulator

dSPACE Smart Charging Emulator Aids Development of Electric Vehicles and Systems

The new emulator enables manufacturers of electric vehicles and suppliers of battery systems to test their new developments with different technical charging standards and protocols.

T/CCI Opens New Advanced Testing Center

The new testing facility provides more efficient and versatile capabilities compared to wind tunnels and other testing solutions.

Freudenberg's new Isolation and Containment Chamber allows the company to safely conduct exposure testing on materials that come in contact with aggressive lithium electrolytic solutions.

Freudenberg Expands Material Testing for Batteries

Freudenberg Sealing Technologies now offers performance and compatibility evaluations of the rubber, elastomers and thermoplastics used in lithium-ion batteries.

At FEV's eDLP, 15 stations in approximately 27,000 sq-ft. cover all common environmental tests for high-voltage batteries, electronic and other vehicle components.

New FEV Test Facility Provides Environmental Testing of Electric Powertrain Components

FEV's new eDLP features 15 stations which cover all common environmental tests, and offers virtual presentations of test findings.

Horibastarsvets 1

HORIBA STARS VETS Vehicle Emissions Test Automation Software

STARS VETS ensures vehicle emissions tests run smoothly and efficiently with preloaded cycles configuration data and results calculations for a wide range of regulatory standards.

ACTIA Electronics offers shock and vibration testing for various electronic components and systems.

ACTIA Electronics Offers Shock and Vibration Testing

Testing will help validate product reliability, minimizing warranty costs post-production for the manufacturer.

MAHLE facility

MAHLE Powertrain Helps Vehicle Manufacturer Overcome Testing Challenges

Use of MAHLE's Real Driving Emissions Centre enabled the replication of real-world drive cycles without the requirement of the customer traveling to the facility.

Borg Warner Ss #9 Cropped (2)

Hybrid and Electrical Vehicle Powertrain Testing is Key to Reaping Efficiency Benefits

Conducting driveline and component testing which is specially adapted to the particular nature of hybrid and electric vehicles ensures optimal performance.

Improve Fabrication and Quality with HRPO Steel

Improve Fabrication and Quality with HRPO Steel

Hot rolled pickled and oiled (HRPO) steel has a scale-free surface that improves cutting, bending and welding for better product quality.

Tor T40 Cb Teaser

HBM T40CB High-Speed Torque Transducer

HBM's T40CB torque transducer provides speeds up to 30,000 rpm for application testing.

Mxpm90 770x460px

HUBER+SUHNER MXPM90 Test Solution

The MXPM90 test solution aids with testing of PAM4/400G ethernet, 5G mobile communication systems and radar sensors.

All the key data from the test setup is collected in the control room.

MAHLE Opens New Test Bench for Electric Drives

The new test bench will aid with the testing and development of e-axles and e-drive units for electric and hybrid vehicles.

Darts 9040 G Unit

dSPACE DARTS 9040-G Target Simulator

The dSPACE DARTS 9040-G target simulator supports demanding sensor tests from development to production.

The Horiba test method can be utilized on a variety of vehicle types.

HORIBA Receives Patent for Real-World Emissions Test Method

The HORIBA Torque-Matching RDE+ laboratory test method supports emulation of real-world emissions tests under different test or vehicle conditions.

Pendulum testing of the new Western Star vocational truck.

Extreme Testing Ensures Durability of New Western Star Vocational Truck

The new truck was subjected to extreme and grueling testing conditions designed by the Product Validation Engineering team of Daimler Trucks North America.

2020 08 25 5 Track Jeversen Zf

ZF Opens Expanded Commercial Vehicle Test Track

ZF’s Commercial Vehicle Control Systems division has invested around 18 million EUR expanding its commercial vehicle testing capability for trucks and buses.

Allison Vet 1

Allison Transmission Vehicle Environmental Test Center Now Open

The test facility includes two chassis dyno-equipped environmental chambers capable of simulating a broad range of duty cycles and environmental conditions.

Horiba Screenshot

Design & Engineering Insights: Horiba Test Systems Aid Development of Electric Vehicles

Test systems for all phases of the product development cycle help to ensure electric-powered equipment meets application requirements.

Voted Sticker 1550339 Px

AEM Equipped to Vote Campaign Urges Support for Pro-Manufacturing Candidates

The goal of the campaign is to engage, educate, and mobilize manufacturing voters on the policies that matter to the equipment manufacturing industry.

Et 4 Photo

Delphin Technology 4-Channel ET-4 Expert Transient Data Acquisition System

The ET-4 Expert Transient data acquisition system is able to synchronously acquire multiple analog channels at sample rates up to 50 kHz.