Voss Urea Quality Sensor

The VOSS urea quality sensor provides a urea concentration range of 5 to 62.5%.

October 20, 2015

VOSS Automotive Inc.

Sv241 N Eltek Q Sensor Rohr 4x1 03 582f2243e1e7e

The urea quality sensor from VOSS Automotive is designed for use in diesel engine SCR aftertreatment systems.

Optimized for OEM specifications
Fully integrated with VOSS Quick Connector
Will not negatively impact SCR performance
Features supply current of 40 mA at 12V or 30 mA at 24V
Urea concentration range of 5 to 62.5%
Measuring temperature range -8 to 60 C
Maximum allowed pressure is 15.5 bar
Features CAN J1939 communication interface

Fill out the form below to request more information about Voss Urea Quality Sensor

Battery Power For Imt Ev 6234972d8b427

Electrification Is the Future, but Is It Current?

Electro-hydraulics have applications everywhere. Here’s what it will take to make them ubiquitous.

heavy duty truck

EPA Proposes Heavy-Duty Vehicle Standards to Promote Clean Air

The U.S. Environmental Protection Agency is proposing new, stronger standards to promote clean air and reduce pollution from heavy-duty vehicles and engines starting in model year 2027.

Engine manufacturers continue to advance aftertreatment and engine designs to meet current and future emissions regulations.

Aftertreatment System Designs Will Evolve to Meet Customer and Emissions Requirements

Increasingly stringent emissions regulations and customer needs will bring about the need for new aftertreatment system technologies.

The Stage V transition deadlines have been extended for some categories of engines.

EU Signs into Law Extension of Stage V Transition Deadlines

The amended legislation will help mitigate some of the most significant disruptions in the sector caused by the COVID-19 pandemic.

Componentson Engine 1066267 Us

Extension Approved for Stage V Transition Deadlines

CECE reports Member State Ambassadors to the European Commission have approved an extension for the EU Stage V transition deadlines.

A Donaldson Stage V integrated aftertreatment system.

Donaldson Announces Termination of Purchase Offer for Exhaust and Emissions Business

The acquisition of Donaldson's Exhaust and Emissions business would have included sales and engineering functions, production facilities and lab capabilities.

Haubenmischer 95 Produkt Compositing

HJS Swirl Cap Mixer

The HJS Swirl Cap Mixer, introduced at bauma 2019, enables highly efficient admixing of AdBlue with exhaust gases and a modular design to easily fit compact installation spaces.

HJS Exhibits System Solutions for Emissions Reduction at bauma 2019

The company exhibited several of its exhaust aftertreatment systems aimed at helping customers comply with emissions regulations.

Injection of fuel: This is a very efficient method because the heat is directed only where it is really needed.

Clean and Cost-Effective Exhaust Aftertreatment for Construction Machinery of the Future

At bauma 2019, Continental Powertrain will present modular solutions designed to address future stricter NOx emissions standards for construction machinery.

The 13.6L engine features several integrated components to provide a more compact, lighter weight engine.

Engine Optimization for Stage V

For the EU’s newest regulation, engine manufacturers are focusing on customer benefits in addition to emissions compliance.

Volvo Group Detects Premature Degradation of Emissions Control Component

The Volvo Group has detected that an emissions control component used in certain markets is degrading more quickly than expected, which could cause the engines to exceed emissions limits for nitrogen oxides.

Inline tunnel mixer system

Eberspaecher Exhibiting Latest Emission Control Systems at IAA 2018

The company will be its tunnel mixer which can be sclae to any diameter, as well as a space-saving catalytic converter.

Der Mann Hummel Bremsstaubpartikelfilter Fuer Nutzfahrzeuge

MANN+HUMMEL Successfully Tests Brake Dust Particle Filter

The new Brake Dust Particle Filter from MANN+HUMMEL reduces the brake dust emissions of vehicles so fewer brake dust particles escape into the environment.

Cummins' Euro VII Vision

Cummins Unveils Low NOx and Low Carbon Dioxide Emissions Technology at IAA 2018

Cummins is exhibiting a concept emissions control system capable of minimizing emissions to levels previously thought unfeasible, as well as smart digital technologies.

Emissions Regulations Cannot Be Applied to Overhang and Half-Track Tractor Engines

The technical difficulty of installing bulky exhaust devices for treating emissions on specialist vineyard and fruit orchard tractors is clear.

Eberspaecher Increases Revenue and Achieves Global Growth

Revenue of approx. 4.5 billion euros

Integer Emissions Summit & AdBlue Forum Europe

June 25, 2019June 27, 2019

The 15th Integer Emissions Summit Europe will take place in Munich, Germany.

Treptow Darrin Oct2015

Connected Components Impact Client Expectations

Telematics data provides valuable insight into customer usage, cycles and profiles, which allow for further optimization of product requirements and specifications to better meet customer needs.

Ben Patel

Clean Air Efforts Continue to Drive Solutions

Tenneco Supplying Aftertreatment Systems for Diamler Trucks Engines

Tenneco announced at the NACV Show 2017 it will supply full aftertreatment systems for new Detroit DD5 and DD8 medium-duty engines.

Beyond Euro VI Concept

Tenneco Exhibits Ride Performance and Clean Air Solutions at NACV 2017

Tenneco exhibited a variety of ride performance products for cab suspensions and vibration damping, as well as clean air technologies such as its Beyond Euro VI Concept.

DEUTZ TCD 13.5 liter

DEUTZ keeps its EU Stage V promise

DEUTZ is the world’s first engine manufacturer to be given an EU Stage V certificate.

Oet Def Tank Straps

Oetiker Diesel Exhaust Fluid (DEF) Tank & Air Vessel Straps

An integrated aftertreatment system for Stage V which includes a DOC, mixer, SDPF and SCR.

Technologies Come Together for Emissions Reduction

Stricter emissions targets for Stage V may require the use of additional componentry, prompting manufacturers to re-evaluate existing technologies and develop more compact, integrated designs.