VDP08 - Pressure compensated directional control valves. From Salami Hydraulics.
- Load sensing directional control valve
- Made on cast-iron (inlet section, working section, end section)
- Available with inlet module for fixed or variable displacement pump
- Inlet module with pressure compensator built-in
- Working modules with pressure compensator built-in
- Possibility of venting valve
- Spool construction in steel, hardened and chromium-plated to obtain a higher surface hardness and a better corrosion resistance
- Several types of spool: double, single acting, spool motor, float position etc.
- Minimum tolerance between the spools and the body to obtain a minimum internal leakage
- Interchangeability of all the spools
- Possibility of auxilliary valve either on port A or B or on both
- Possibility of pressure relief valve on the LS line coming from the ports
- Handle control also with friction to look the spool in every intermediate position
- Pneumatic proportional control available
- Closed loop electronic-hydraulic control available
- On-off electro-hydraulic control available 12 or 24V DC
Request More Information
Fill out the form below to request more information about VDP08