Mercedes-Benz

Contact

http://www2.mercedes-benz.co.uk/content/unitedkingdom/mpc/mpc_unitedkingdom_website/en/home_mpc/truck.flash.skipintro.html#_int_truck:home:home-link:truck

New Mercedes-Benz eCitaro G Utilizes Solid-State Batteries

The new electric bus is equipped with solid-state batteries which offer high energy density for increased power and longer life.

Mercedes-Benz Trucks Accident Research Aids Advances in Safety Technology

Numerous safety innovations in Mercedes-Benz trucks are based on findings from its years of accident research.

An almost fully digital workplace came in 2018 which included two high-resolution screens replacing the traditional instrument panel.

Evolution of the Truck Cab

Daimler evaluates how truck cabs have changed in the past 60 years, going from a box to a high-tech cockpit.

10 Facts About Predictive Cruise Control in Trucks

Mercedes-Benz Trucks predictive cruise control technology combines 3D maps and GPS data to improve truck driving efficiency.

The marked area illustrates the visual gain achieved by replacing traditional rearview mirrors with a camera replacement system.

How do Camera Monitoring Systems Work?

Daimler Trucks answers key questions about how its mirror replacement system MirrorCam works and the visibility improvements it provides.

Mercedes Benz Bosch Testing Center Brazil

New Test Center in Brazil to Aid Heavy-Duty Vehicle and Component Development

Mercedes-Benz and Bosch are building a new Vehicle Test Center which will be available to other manufacturers, as well to aid their research and development.

Engine production is resuming at DEUTZ facilities to help meet customer demand.

Strength of Industries: Manufacturers Get Back to Work and a New Normal

For the many heavy equipment and component manufacturers who had to temporarily shut down due to COVID-19, operations are starting to reopen and get back to some normalcy.

Mekra Lang Digital Vision System

MEKRA Lang Debuts Mirror-Replacement Camera System at IAA 2018

MEKRA Lang's Digital VisionSystem replaces both mirrors on the outside of a truck cab with aerodynamically optimized camera wings.

Winners Named for Sustainable Bus Award 2019

Iveco, Mercedes and Volvo are among the winners of the Sustainable Bus Award 2019, which will be given out at IAA Commercial Vehicles 2018.

A digital twin of the Stratasys Robotic Composite 3D Demonstrator inside Siemens’ NX software simulates multi-axis fused deposition modeling of a lightweight composite part.

Production-Level 3D Printing Gains Momentum

The feasibility of 3D printing end-use parts has grown in recent years, and now brings the challenge of making it a normal part of the production process.

Fill out the form below to request more information about Mercedes-Benz

20 C0146 025

New Mercedes-Benz eCitaro G Utilizes Solid-State Batteries

The new electric bus is equipped with solid-state batteries which offer high energy density for increased power and longer life.

20 C0443 04

Mercedes-Benz Trucks Accident Research Aids Advances in Safety Technology

Numerous safety innovations in Mercedes-Benz trucks are based on findings from its years of accident research.

An almost fully digital workplace came in 2018 which included two high-resolution screens replacing the traditional instrument panel.

Evolution of the Truck Cab

Daimler evaluates how truck cabs have changed in the past 60 years, going from a box to a high-tech cockpit.

20 C0307 009

10 Facts About Predictive Cruise Control in Trucks

Mercedes-Benz Trucks predictive cruise control technology combines 3D maps and GPS data to improve truck driving efficiency.

Engine production is resuming at DEUTZ facilities to help meet customer demand.

Strength of Industries: Manufacturers Get Back to Work and a New Normal

For the many heavy equipment and component manufacturers who had to temporarily shut down due to COVID-19, operations are starting to reopen and get back to some normalcy.

The marked area illustrates the visual gain achieved by replacing traditional rearview mirrors with a camera replacement system.

How do Camera Monitoring Systems Work?

Daimler Trucks answers key questions about how its mirror replacement system MirrorCam works and the visibility improvements it provides.

Mercedes Benz Bosch Testing Center Brazil

New Test Center in Brazil to Aid Heavy-Duty Vehicle and Component Development

Mercedes-Benz and Bosch are building a new Vehicle Test Center which will be available to other manufacturers, as well to aid their research and development.

Actros With Mirror Cam Camera

Mirror Replacement System Hits Roadways in Europe

Mercedes-Benz Actros is available standard with the MirrorCam digital rear-view system aimed at improving all-around visibility for heavy-duty trucks.

The upright exhaust system for four-axle vehicles is now available ex factory. It creates additional installation space for equipment on the side of the chassis, and has a weight advantage over the previous solution.

New Arocs with Multimedia Cockpit Unveiled at bauma 2019

The Multimedia Cockpit consists of two digital displays and supplements the switch control panel in the dashboard.

19 C0062 002

Mercedes-Benz Exhibiting New Actros with Semi-Automated Driving at bauma 2019

Active Drive Assist is an active driving assistance system which can accelerate, brake and steer without driver intervention.

19 C0077 02

Mercedes-Benz Antos Features Integrated Sideguard Assist

Sideguard Assist monitors the entire length of the vehicle and also takes into account the trailer's tractrix curve, and uses a warning light followed by an audible tone to alert drivers.

18 C0857 02

Mercedes-Benz Trucks Deliver All-Electric eActros to Customer

Meyer-Logistik will test drive the all-electric truck for its transport of temperature-sensitive foodstuffs to supermarkets in the center of Hamburg.

Mekra Lang Digital Vision System

MEKRA Lang Debuts Mirror-Replacement Camera System at IAA 2018

MEKRA Lang's Digital VisionSystem replaces both mirrors on the outside of a truck cab with aerodynamically optimized camera wings.

18 C0798 001

Automated Mercedes-Benz Axor Vehicles Aiding Sugar Cane Harvest in Brazil

The Axor is equipped with all the components required for automated Level 2 driving, enabling it to automatically control the speed and proximity as well as longitudinal and lateral guidance.

18 C0724 01

Mercedes-Benz Celebrates Production Start-Up of New Actros with Special Edition 1 Model

During IAA, Mercedes-Benz introduced the special edition Actros with safety features including Active Drive Assist, MirrorCam, and Active Brake Assist 5.

Iveco Crealis

Winners Named for Sustainable Bus Award 2019

Iveco, Mercedes and Volvo are among the winners of the Sustainable Bus Award 2019, which will be given out at IAA Commercial Vehicles 2018.

18 C0490 010

Mercedes-Benz Debuts Actros with Active Drive Assist

The truck's new Active Drive Assist can brake, accelerate and steer in all speed ranges, and includes a mirror-cam instead of exterior mirrors.

Unimog U 427 + U 400

Mercedes-Benz Unimog for Forestry Applications to Debut at 2018 INTERFORST

Mercedes-Benz will exhibit three Unimog models designed specifically for forestry applications, including one with a front-mounted chipper.

18 C0166 017

All-Electric Mercedes-Benz Trucks to Roll Out to Customers in 2018

Ten vehicles in two variants will be handed over in the next few weeks to customers, who will be testing their everyday feasibility and economic efficiency under real-life conditions.

17 C968 01

Mercedes-Benz Econic Compresses Refuse with Electric Tipper Body

The entire body of the Mercedes-Benz Econic 1838 4x2 is electrically driven, enabling quiet and efficient trash compaction capabilities within city centers.

17 C686 009

Daimler Premieres Mercedes-Benz Citaro Hybrid at Busworld Europe 2017

The Mercedes-Benz Citaro hybrid offers up to 8.5% lower fuel consumption and uses braking energy to electrically power the bus.

A digital twin of the Stratasys Robotic Composite 3D Demonstrator inside Siemens’ NX software simulates multi-axis fused deposition modeling of a lightweight composite part.

Production-Level 3D Printing Gains Momentum

The feasibility of 3D printing end-use parts has grown in recent years, and now brings the challenge of making it a normal part of the production process.

17 C840 01

Daimler Demonstrates Automated Snow Removal Operations at Airport

Four Mercedes-Benz Arocs tractor units are being used to demonstrate automated airfield clearing in a remote-controlled convoy.

The view into the interior of the 3D printer shows the first printed thermostat covers, which are still connected to the work platform. After removal of the platform and support structure, the aluminum/silicon metallic powder is removed by suction, sieved, cleaned and ecologically fed back into the recycling system.

Mercedes-Benz 3D Prints First Spare Part Made of Metal

Mercedes-Benz Trucks has 3D printed its first spare part made of metal, a thermostat cover for truck and Unimog models.