iCAP Series Ultracapacitors

Ioxus' iCAP Series ultracapacitors feature an operating temperature range of -40 to 65 C.

January 15, 2015

iCAP Series ultracapacitors

The Ioxus iCAP Series ultracapacitors feature a high operating temperature range for use in harsh environmental conditions.

Features weldable screw terminals
RoHS compliant
Extreme temperature operating range of -40 to 65 C
Offers high cycle life of more than 1,000,000 cycles
Delivers 2.7V of power
Applications include engine starting, regeneration energy capture, backup power and more

Fill out the form below to request more information about iCAP Series Ultracapacitors

Amplify Cell Technologies Board Members and Distinguished Guests Break Ground

Amplify Cell Technologies Begins Construction of Mississippi Battery Cell Factory

The 500-acre site will be home to a 2 million square-foot, energy efficient facility. Amplify plans to begin battery cell production in 2027 and is expected to create more than 2,000 U.S. manufacturing jobs.

Based on Hitachi Construction Machinery’s experience with dump trucks equipped with trolley dynamic charging systems, the full battery dump truck is able to continuously operate practically in sites, by directly charging from the overhead lines and regenerative braking system without needing to stop and charging through the adoption of the battery system developed by ABB.

Hitachi Construction Machinery Launches Feasibility Trial of Full-Battery Dump Truck

The trial aims to verify the basic performance of operations required of a battery-powered dump truck – such as traveling, turning and stopping – under actual operating loads, as well as the verification of battery charging and and discharging cycles.

Pramesh Maheshwari, president of Honeywell Process Solutions (left) and Mika Kulju, president of Danfoss Drives (right) sign memorandum of understanding (MoU) to explore a possible collaboration on innovating automation solutions.

Danfoss Drives & Honeywell Explore Collab Focused on Automation Solutions

The companies have signed a non-binding memorandum of understanding (MoU) to explore a possible collaboration on innovating automation solutions with an integrated architecture, aiming to reduce downtime and lower engineering costs.

Flux Power Appoints Mark Leposky to Board of Directors

The 30-year global supply chain executive at Fortune 500 consumer brands is positioned to advance the company’s new strategic growth initiatives.

Behind the Scenes: ZQuip's Modular Battery Systems

Rob Bauer and Holger Pietzch share insights into the tech behind the companies’ latest product release, how it works, and its path forward in the market.

Volvo Penta will provide an optimized BESS subsystem for Aiab Energy’s future BESS solutions.

Volvo Penta & Aiab Energy Expand Collaboration Into BESS Solution

As power generation company Aiab Energy diversifies its portfolio into battery energy storage systems (BESS), Volvo Penta is set to provide an optimized BESS subsystem for its future BESS solutions.

Quantix Ultra

Freudenberg Sealing Technologies Develops Extremely Temperature-Resistant Plastics for EVs

Quantix ULTRA, a material that resists melting, even at temperatures up to 2,192 degrees Fahrenheit, is undergoing its first series application as a flame protection barrier for cooling system parts in an electric car’s lithium-ion battery.

Adobe Stock 687573020

Battery Testing for Off-Road Electric Vehicles

Inside the critical considerations for engineers designing and testing long-lasting, durable batteries that can stand up to harsh conditions in the off-road vehicle sector.

Accelera

Cummins, Daimler Truck, PACCAR to Produce Batteries in Mississippi

The 21-gigawatt hour (GWh) factory is expected to begin producing battery cells in 2027.

Flory Industries nut harvester

Caterpillar's Most Recent Collab: Electrified Powertrain Prototype for Nut Harvesting Equipment

The goal is to demonstrate how a 600-volt battery-powered powertrain can deliver the performance currently provided in this application by a conventional 74-horsepower diesel engine while reducing maintenance and operating with zero tailpipe emissions.

Volvo CE teamed with Air Burners to prove out the charging capabilities of the BioCharger with its new 23-ton crawler excavator, the EC230 Electric. The EC230 Electric is currently in pilot testing across North America ahead of its commercial launch next year.

Air Burners Launches BioCharger Collab With Rolls-Royce & Volvo CE

The new air curtain burner creates an environmentally friendly, closed-looped system for managing vegetative waste and powering electric machinery fully off-grid.

Main

More Power for Your Electric Machine

While two-level power inverters are common, three-level inverters can boost efficiency, power output and sustainability. Learn how OEMs and operators are using this tech to power machines efficiently while reducing costs and their carbon footprint.

Clean, Reliable AC Power with Eaton’s True Sine Wave Inverters

Clean, Reliable AC Power with Eaton’s True Sine Wave Inverters

Designed to withstand extreme vibrations and operate in harsh conditions, these inverters are tested to meet SAE environmental and EMC standards.

Cat Energy Storage Systems

Caterpillar Announces Cat Energy Storage Systems

The modules offer rapidly deployable energy storage capabilities through integrated systems, including battery energy storage, inverters, isolation transformers, fire suppression system and supporting equipment built in weather-resistant containers.

Hiroyuki Ogawa, president and CEO, Komatsu Ltd. (left) and Subhash Dhar, Founder, Chairman and CEO, ABS (right)

Komatsu to Acquire American Battery Solutions

The acquisition will enable Komatsu to develop and produce its own battery-operated construction and mining equipment, through the integration of ABS’ battery technology with Komatsu’s knowledge and network.

Vanguard's new MVG3000 & MVG4000

Vanguard Debuts New Motors, Motor Controllers & Diversified Battery Portfolio

The company is on a mission to make it easier for OEMs to incorporate battery power into their equipment offerings, because more industries are expecting and demanding reliable, clean battery power.

Freightliner4[1]

Daimler Truck North America Begins Series Production of Freightliner eM2 Battery Electric Trucks

The eM2 features a proprietary, fully integrated, battery electric Detroit ePowertrain. Execs say this release marks another important milestone on the company's journey to a zero-emissions product line.

Screenshot 2023 09 13 151547

Elektro-Automatik Introduces New BCTS at The Battery Show North America

Live from The Battery Show: Editor Kathy Wells speaks with Elektro-Automatik Applications Engineer Steven Soria about the new EA Battery Cycler Test System (BCTS), which the team launched at the show.

Turntide 0923

Turntide Technologies Debuts NMC Battery Pack at The Battery Show North America

Live from The Battery Show: OEM Off-Highway Editor Kathy Wells speaks with Turntide Technologies Russell Stoddart, vice president of battery solutions, about the debut and benefits of Turntide's new Lithium-Ion NMC Battery Pack.

Accelera Announcement Resized

Cummins, Daimler Truck & Paccar Form Joint Venture to Advance Battery Cell Production in US

The partnership will manufacture battery cells for electric commercial vehicles and industrial applications and create jobs. Total investment is expected to be in the range of $2 billion to $3 billion for the 21-gigawatt hour factory.

Basco Van 23403 B Fy23 Elect Oem Article Image 1

HOW TO ELECTRIFY YOUR EQUIPMENT: KEY CONSIDERATIONS FOR OEMS

If you're an original equipment manufacturer (OEM) considering a transition to battery-powered products, you're not alone — and you shouldn't do it alone, either. Learn how an experienced partner can make your electrification experience a positive one.

What OEMs Need to Know About Battery Power

Nick Moore, director of product management, electrification, for Briggs & Stratton, covers everything OEMs should know about battery power.

Van Si1 5k Wh Battery Fl

1.5 Kilowatt-Hour Swappable Battery

The exchangeable design allows users to swiftly swap freshly charged packs from application to application.

7 Things OEMs Must Know About Batteries and Electrification

OEMs have a lot to consider when selecting electrification power sources. Here are seven basics you need to know when choosing battery power.