Solid State Electro-optic Level ELS-1150 Series Switch

June 1, 2009

Gems Sensors & Controls

Solidstateelectroopticlevelels1150seriesswitch 10058226

Gems Sensors & Controls introduces the new solid state electro-optic level ELS-1150 Series switch for high temperature and high-pressure applications.

1.38 in. long
Micro processor board design to provide a wide range of capabilities including sinking and sourcing and time delay outputs
Fused glass prism eliminates leak potential
Pressure up to 2,500 psi
Available in FM and EP versions
Temperature ranges up to 125 C
Nickel-plated Carbon Steel or Stainless Steel

Fill out the form below to request more information about Solid State Electro-optic Level ELS-1150 Series Switch

Baumer Presse Gim600 R Bg Print (1)

Baumer Releases GIM600R Safety Inclination Sensor

Developed for rough conditions in mobile machines, the GIM600R guarantees high measuring accuracy in accordance with the latest safety standards.

Particularly developed for mobile machines: The Baumer ultrasonic sensor UF401V is designed for maximum reliability even under wet conditions, dust, chemicals and extreme temperatures.

Baumer Releases Ultrasonic Sensor UF401V for Mobile Machines

Specifically designed for harsh conditions, UF401V is engineered for maximum reliability even under wet, dusty, chemical and extreme temperature conditions and has been tested to the highest standards of the off-highway industry.

Pareu996 A Scp09 Hres

Parker Hannifin Introduces SCP09 Pressure Sensor for Hydraulic Applications

The sensor is designed for long-term stability and low drift, and has a pin configuration adapted for OEMs, with common electrical interfaces and process connections.

Ffk5600

An Artificial Future: What’s Next for Advanced Vehicle Safety Solutions?

Five questions addressing the challenges of AI in onboard camera systems, object detection and risk reduction.

AGCO & Trimble Close Joint Venture, Form PTx Trimble

PTx Trimble combines Trimble's precision agriculture business and AGCO's JCA Technologies to form a new company that will serve farmers with factory fit and retrofit applications in the mixed-fleet precision agriculture market.

The CAN Actuator is a drive-by-wire alternative to the typical push/pull cable mechanical shifter to rotate the shift shaft on a variety of on- and off-highway vehicle transmissions, with this next generation technology developed to be easily adapted for transmissions from other OEMs.

Curtiss-Wright Unveils Updates & New Offerings at INTERMAT 2024

At the April trade show, the company aims to highlight its continued development of vehicle controllers, introduce updated sensor solutions and promote vehicle electrification with its eMobility Solutions portfolio.

Baumer Eb360 R Pr De 20240306 Presse

Baumer Presents New Multiturn Encoder for Mobile Machines

The new non-contact encoder EB360R offers a compact design for precise angle position and speed feedback, even in harsh environments, making it ideal for use in construction vehicles, working platforms or agricultural machines.

Ax130760 High

Axiomatic Releases Single Voltage, Current & PWM Output Controller With CAN SAE J1939 Interface

With rugged enclosure and robust control algorithms, AX130760 may be used in distributed control applications in commercial vehicles, off-highway equipment, industrial equipment, oil and gas equipment, and agricultural equipment.

M14 & M18 Speed Sensors

RHEINTACHO Develops M14 & M18 Speed Sensors

Two new two-channel differential Hall sensors detect the speed and direction of rotation of gears with high resolution and a wide frequency range.

POSITAL IXARC magnetic incremental encoders can be programmed with pulse rates as low as 0.125 PPR

POSITAL Updates Programmable Encoders to Support Fractional PPR

Rugged IXARC incremental encoders offer pulse rates as low as 0.125 pulses per revolution.

Coop Dt Torc Aev 240108 2 (1)

Daimler Truck, TORC Robotics & Aeva Partner on Series-Production Autonomous Trucks

The multiyear collaboration begins in the first quarter of 2024 with Aeva’s start of production by 2026 and Daimler Truck’s production ramping up by 2027.

The new generation of kit encoders from POSITAL is designed to be integrated into electric motors, providing position feedback for the control system.

POSITAL Introduces Next-Gen Kit Encoders

Upgrades to the new devices include higher resolution and refined packaging that provides more compact form factors, better protection from solid particles and simpler installation procedures.

HMI Displays of the Future: 6 Predictions for OEMs

HMI Displays of the Future: 6 Predictions for OEMs

Display technology is advancing at a rapid pace, but that doesn’t always translate into actionable improvements for heavy equipment manufacturers and their suppliers. We make some predictions on what you can expect to see – and how you can take the lead.

CANopen safety encoders with SIL3 certification

TWK Releases CANopen Safety Encoders With SIL3 Certification

In automated guided vehicles (AGVs) and autonomous mobile robots (AMRs) requiring no direct human supervision, minimizing dangerous moments caused by malfunctions can be accomplished using a range of sensor technologies.

Spraying Farm Machine

Optimizing Agricultural Sprayers With Inclinometer Technology

Learn how this component contributes to precise coverage in agriculture applications

IXARC Encoders

POSITAL Introduces New Generation of Absolute Encoders

The updated IXARC magnetic encoders feature improved performance (up to 18-bit resolution), energy efficiency and optimized Wiegand package featuring a newly developed ASIC that functions

Banda Turck Ceo Picture

Turck Inc. Names Aurelio Banda President & CEO

The former SVP and group executive at Motion Industries now joins the Turck team to lead the U.S. arm of global automation manufacturer's business

TLD356A01 and TLD356A03 Miniature ICP® Triaxial Accelerometer with TEDS

PCB Upgrades Miniature ICP Triaxial Accelerometer

The addition of TEDS functionality minimizes errors from manual sensitivity entries, reducing setup time

Absolute SIL2 encoder with CANopen safety interface

TWK Launches Safe Compact Encoders for Autonomous Vehicles

Autonomous industrial trucks require angle and speed measurements that can be gathered by safe and certified encoders with a safety interface on rotary axes or drive motors.

Maxi 2

The maximatecc Product Portfolio

maximatecc has products around the globe in a variety of different market segments for construction, agriculture, specialty vehicle, outdoor power equipment, even military applications.

Mackmack

maximatecc Talks Technology at CONEXPO

We had a great conversation with the maximatecc team during CONEXPO-CON/AGG! Check out the video and stop by Booth S60329 to learn more.

Home Tablet

Enhanced Construction Management Applications and New Workflow Connectivity Capabilities from B2W Software

These enhancements provide more and better data, increased efficiency and further connection across workflows.

Ad Bradlee

RFID Inlays Discussed at The Battery Show 2022

Avery Dennison expert Gardner Bradlee details this technology with our team.

Appareo

Telematics & Sensor Conversation During iVT Expo 2022

During the show, an Appareo expert discusses the telematics and sensing technology the team shared at its booth.