Integrated Particulate Monitor (IPM) Series

December 16, 2014
Parker Velcon Filtration Division
IPM Overview with MD3a 5490b6922304b
Coloradobldg 10234475

Parker Velcon’s Integrated Particulate Monitor (IPM™) Series represents the most up-to-date technology in solid particle contamination analysis.

  • Compact, permanently mounted laser-based particle detector module
  • Provides a cost-effective solution to fluid management and contamination control
  • IPM-200 measures particle contamination continuously utilizing the Parker Icount Technology, updates the display, and outputs ISO code values to an RS-232 or CAN bus based data acquisition module
  • IPM-110 and 115 measure particle contamination continuously utilizing the Parker IcountPD (IPD) and output ISO code values through CAN bus
  • Independent monitoring of fuel contamination trends
  • Continuous or intermittent monitoring performance for dependable analysis
  • Cellular telemetry and online data solution available
Request More Information
Fill out the form below to request more information about Integrated Particulate Monitor (IPM) Series
Latest
Clear Flame Truck 0722
The Fastest Path to Emissions Reduction for Heavy-Duty Diesel Engines
Make the most of current technology and alternative fuels.
August 12, 2022
Eaton Aftertreatment
48-Volt Aftertreatment Heater Controller
The air-cooled electric catalyst heater controller is part of Eaton’s broader 48-volt electrical system portfolio.
June 30, 2022
Battery Power For Imt Ev 6234972d8b427
Electrification Is the Future, but Is It Current?
Electro-hydraulics have applications everywhere. Here’s what it will take to make them ubiquitous.
March 18, 2022
heavy duty truck
EPA Proposes Heavy-Duty Vehicle Standards to Promote Clean Air
The U.S. Environmental Protection Agency is proposing new, stronger standards to promote clean air and reduce pollution from heavy-duty vehicles and engines starting in model year 2027.
March 8, 2022
Engine manufacturers continue to advance aftertreatment and engine designs to meet current and future emissions regulations.
Aftertreatment System Designs Will Evolve to Meet Customer and Emissions Requirements
Increasingly stringent emissions regulations and customer needs will bring about the need for new aftertreatment system technologies.
February 14, 2022
The Stage V transition deadlines have been extended for some categories of engines.
EU Signs into Law Extension of Stage V Transition Deadlines
The amended legislation will help mitigate some of the most significant disruptions in the sector caused by the COVID-19 pandemic.
February 1, 2022
Componentson Engine 1066267 Us
Extension Approved for Stage V Transition Deadlines
CECE reports Member State Ambassadors to the European Commission have approved an extension for the EU Stage V transition deadlines.
July 1, 2020
A Donaldson Stage V integrated aftertreatment system.
Donaldson Announces Termination of Purchase Offer for Exhaust and Emissions Business
The acquisition of Donaldson's Exhaust and Emissions business would have included sales and engineering functions, production facilities and lab capabilities.
June 5, 2020
Haubenmischer 95 Produkt Compositing
HJS Swirl Cap Mixer
The HJS Swirl Cap Mixer, introduced at bauma 2019, enables highly efficient admixing of AdBlue with exhaust gases and a modular design to easily fit compact installation spaces.
April 23, 2019
HJS Exhibits System Solutions for Emissions Reduction at bauma 2019
The company exhibited several of its exhaust aftertreatment systems aimed at helping customers comply with emissions regulations.
April 22, 2019
Injection of fuel: This is a very efficient method because the heat is directed only where it is really needed.
Clean and Cost-Effective Exhaust Aftertreatment for Construction Machinery of the Future
At bauma 2019, Continental Powertrain will present modular solutions designed to address future stricter NOx emissions standards for construction machinery.
March 20, 2019
The 13.6L engine features several integrated components to provide a more compact, lighter weight engine.
Engine Optimization for Stage V
For the EU’s newest regulation, engine manufacturers are focusing on customer benefits in addition to emissions compliance.
October 16, 2018
Volvo Group Detects Premature Degradation of Emissions Control Component
The Volvo Group has detected that an emissions control component used in certain markets is degrading more quickly than expected, which could cause the engines to exceed emissions limits for nitrogen oxides.
October 16, 2018
Inline tunnel mixer system
Eberspaecher Exhibiting Latest Emission Control Systems at IAA 2018
The company will be its tunnel mixer which can be sclae to any diameter, as well as a space-saving catalytic converter.
September 24, 2018
Der Mann Hummel Bremsstaubpartikelfilter Fuer Nutzfahrzeuge
MANN+HUMMEL Successfully Tests Brake Dust Particle Filter
The new Brake Dust Particle Filter from MANN+HUMMEL reduces the brake dust emissions of vehicles so fewer brake dust particles escape into the environment.
September 24, 2018
Cummins' Euro VII Vision
Cummins Unveils Low NOx and Low Carbon Dioxide Emissions Technology at IAA 2018
Cummins is exhibiting a concept emissions control system capable of minimizing emissions to levels previously thought unfeasible, as well as smart digital technologies.
September 19, 2018
Emissions Regulations Cannot Be Applied to Overhang and Half-Track Tractor Engines
The technical difficulty of installing bulky exhaust devices for treating emissions on specialist vineyard and fruit orchard tractors is clear.
July 5, 2018
Eberspaecher Increases Revenue and Achieves Global Growth
Revenue of approx. 4.5 billion euros
May 8, 2018
Integer Emissions Summit & AdBlue Forum Europe
June 25, 2019June 27, 2019
The 15th Integer Emissions Summit Europe will take place in Munich, Germany.
Treptow Darrin Oct2015
Connected Components Impact Client Expectations
Telematics data provides valuable insight into customer usage, cycles and profiles, which allow for further optimization of product requirements and specifications to better meet customer needs.
October 18, 2017
Ben Patel
Clean Air Efforts Continue to Drive Solutions
October 18, 2017
Tenneco Supplying Aftertreatment Systems for Diamler Trucks Engines
Tenneco announced at the NACV Show 2017 it will supply full aftertreatment systems for new Detroit DD5 and DD8 medium-duty engines.
September 26, 2017
Beyond Euro VI Concept
Tenneco Exhibits Ride Performance and Clean Air Solutions at NACV 2017
Tenneco exhibited a variety of ride performance products for cab suspensions and vibration damping, as well as clean air technologies such as its Beyond Euro VI Concept.
September 25, 2017
DEUTZ TCD 13.5 liter
DEUTZ keeps its EU Stage V promise
DEUTZ is the world’s first engine manufacturer to be given an EU Stage V certificate.
September 8, 2017